KwikSafety (Charlotte, NC) SUPERCELL Aerial Lift Safety Harness (3 D-Rings, Shoulder Pads) Construction ANSI Tested OSHA
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
PolyesterImportedWE DON\'T CUT CORNERS ON SAFETY: The KwikSafety SUPERCELL is a durable, heavy duty, high performance Full Body Harness that meets and exceeds ANSI/ASSE Z359.11-2014 standards. Our safety harness fall protection is the complete safety package. Be seen and safe with the fluorescent yellow synthetic material. Use with any compatible fall protection safety lanyard, energy absorbers, lifelines, and anchorage lanyards. Safely perform the job knowing the SUPERCELL fall protection harness has your back!HEAVY DUTY D-RINGS: One back dorsal ring and two side hip rings provide functionality on the construction job. The side rings are for work positioning purposes only; while the dorsal ring used for fall arrest & can be used for travel restraint or rescue. Shoulder support paddings have been added to prevent injury and provide comfort. The load bearing tongue buckle straps on our universal harness are made out of non-recycled synthetic material that is equivalent or superior to polyester.PROPER FIT, PROPER PERFORMANCE: Regardless if its a mens or womens harness, correct fit is essential for proper performance. Our adjustable KwikSafety SUPERCELL full body harness supports users within the capacity range of 130 to 310 pounds (59 to 140 kg), 4’10” to 6’6” (147 to 198 centimeters) due to the adjustment points. To ensure your harnesses properly fit, see that all buckles are connected, leg and shoulder straps are snug, and chest straps are in the center of the chest area.WE MET THE STANDARD, THEN ROSE ABOVE IT: ANSI/ ASSE Z359.11-2014: All of our KwikSafety Full Body Harnesses have undergone the "Qualification and Verification Testing of Fall Protection Products". This testing specifies requirements which include the number of specimens to be tested, test equipment to be used, the accreditation of the testing lab and the duties and responsibilities of both the manufacturer and the testing lab. View the Compliance Label/ Safety Label for more information.OSHA APPROVED: The Occupational Safety & Health Administration assures men and women safe and healthful working conditions by setting standards and providing training, outreach, education, and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels. The SUPERCELL safety fall protection harness is ideal for a roofer, ironworker, construction work, arborist work, high-rise window cleaning, gutter cleaning, roofing and thatching, and Search and Rescue.
상품설명
Our OSHA Approved and ANSI Compliant KwikSafety High Quality Fall Protection Safety Harness (Universal Arnes de seguridad) is for any industry and any application. It has 1 ¾ -inches wide yellow load bearing straps and black lock stitched webbing to keep you safe and secure while working and if a fall were to occur. Our bright yellow load bearing straps are visible in various weather conditions: direct sunlight, foggy, dusty and dim-light. Easily connect the front, side, and back straps with a pass-through buckle. A Single (1) metal Dorsal Ring is located on the back of the Full Body Harness (arneses para construcción, arnes para roofing) and is used as the primary fall arrester attachment. D-rings located on the hips of a safety harness (arnes seguridad) are for work positioning uses ONLY. Hip rings are NOT used for fall protection but for maneuverability in job types including arborists, utility workers climbing poles, construction workers tying rebar or operating in a suspended lift or boom. Water repellent safety webbing ergonomically supports back and hips, making the harness comfortable while bearing the weight of the user as well as the weight of tools that may be attached. Our harness protection is available in a pack combo or kit. Our KwikSafety Full Body Harness is One Size Fits Most and fits a men\'s and women\'s height range of 4’10” to 6’6”; and a weight range of 130 lbs. to 310lbs. Here at KwikSafety craftsmanship, care and pride is taken with a critical eye when it comes to our products and to the workers safety. Our KwikSafety D Ring Safety Harness exceeds all applicable industry standards including OSHA and ANSI and is Government Approved, DOD Approved, Airport & Port Approved, and RapidGate and TWIC Approved. Great for use at Ports, Airports, Highways, Military Installations and Other Government Facilities. If you happened to order the wrong size or item, we offer Hassle Free Returns within 30 days if your item was shipped via Amazon FBA!
PolyesterImportedWE DON\'T CUT CORNERS ON SAFETY: The KwikSafety SUPERCELL is a durable, heavy duty, high performance Full Body Harness that meets and exceeds ANSI/ASSE Z359.11-2014 standards. Our safety harness fall protection is the complete safety package. Be seen and safe with the fluorescent yellow synthetic material. Use with any compatible fall protection safety lanyard, energy absorbers, lifelines, and anchorage lanyards. Safely perform the job knowing the SUPERCELL fall protection harness has your back!HEAVY DUTY D-RINGS: One back dorsal ring and two side hip rings provide functionality on the construction job. The side rings are for work positioning purposes only; while the dorsal ring used for fall arrest & can be used for travel restraint or rescue. Shoulder support paddings have been added to prevent injury and provide comfort. The load bearing tongue buckle straps on our universal harness are made out of non-recycled synthetic material that is equivalent or superior to polyester.PROPER FIT, PROPER PERFORMANCE: Regardless if its a mens or womens harness, correct fit is essential for proper performance. Our adjustable KwikSafety SUPERCELL full body harness supports users within the capacity range of 130 to 310 pounds (59 to 140 kg), 4’10” to 6’6” (147 to 198 centimeters) due to the adjustment points. To ensure your harnesses properly fit, see that all buckles are connected, leg and shoulder straps are snug, and chest straps are in the center of the chest area.WE MET THE STANDARD, THEN ROSE ABOVE IT: ANSI/ ASSE Z359.11-2014: All of our KwikSafety Full Body Harnesses have undergone the "Qualification and Verification Testing of Fall Protection Products". This testing specifies requirements which include the number of specimens to be tested, test equipment to be used, the accreditation of the testing lab and the duties and responsibilities of both the manufacturer and the testing lab. View the Compliance Label/ Safety Label for more information.OSHA APPROVED: The Occupational Safety & Health Administration assures men and women safe and healthful working conditions by setting standards and providing training, outreach, education, and assistance. A personal fall arrest system is required when working 6ft. or more above lower levels. The SUPERCELL safety fall protection harness is ideal for a roofer, ironworker, construction work, arborist work, high-rise window cleaning, gutter cleaning, roofing and thatching, and Search and Rescue.
상품설명
Our OSHA Approved and ANSI Compliant KwikSafety High Quality Fall Protection Safety Harness (Universal Arnes de seguridad) is for any industry and any application. It has 1 ¾ -inches wide yellow load bearing straps and black lock stitched webbing to keep you safe and secure while working and if a fall were to occur. Our bright yellow load bearing straps are visible in various weather conditions: direct sunlight, foggy, dusty and dim-light. Easily connect the front, side, and back straps with a pass-through buckle. A Single (1) metal Dorsal Ring is located on the back of the Full Body Harness (arneses para construcción, arnes para roofing) and is used as the primary fall arrester attachment. D-rings located on the hips of a safety harness (arnes seguridad) are for work positioning uses ONLY. Hip rings are NOT used for fall protection but for maneuverability in job types including arborists, utility workers climbing poles, construction workers tying rebar or operating in a suspended lift or boom. Water repellent safety webbing ergonomically supports back and hips, making the harness comfortable while bearing the weight of the user as well as the weight of tools that may be attached. Our harness protection is available in a pack combo or kit. Our KwikSafety Full Body Harness is One Size Fits Most and fits a men\'s and women\'s height range of 4’10” to 6’6”; and a weight range of 130 lbs. to 310lbs. Here at KwikSafety craftsmanship, care and pride is taken with a critical eye when it comes to our products and to the workers safety. Our KwikSafety D Ring Safety Harness exceeds all applicable industry standards including OSHA and ANSI and is Government Approved, DOD Approved, Airport & Port Approved, and RapidGate and TWIC Approved. Great for use at Ports, Airports, Highways, Military Installations and Other Government Facilities. If you happened to order the wrong size or item, we offer Hassle Free Returns within 30 days if your item was shipped via Amazon FBA!
2020-09-21 20:10:50