Black Diamond Ceramic Coating 60ML
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
?9H hardness once cured! Other normal clear coats have a hardness generally of 2-4H.?Increased ability to polish light scratches out without weakening or damaging the original clear coat or paint.?Black Diamond Ceramic dramatically lowers the surface tension preventing contaminants like bird droppings, fuel, dirt, tar... from damaging your paint. Think of the ceramic coating as a sacrificial layer that can easily be reapplied. This ceramic coating is good for 5-7 years if maintained correctly.?For use on automotive paint, boat gel coats and hulls to break surface tension, resin tables, vinyl wraps...
상품설명
?1. Pre Wash ?2. Decontaminate surfaces ?3. Applying Black Diamond Ceramic Coating - Use proper skin protection - Apply in 2x2 (60cm x 60cm) sections - Apply 3-4 Drops of Black Diamond Ceramic Coating to a mico fiber cloth and apply using a cross hatch pattern * Wait 1-6 minutes depending on the temperature - Use light pressure to wipe away the excess coating - Check for excess coating "high spots" and lightly even out the coating. **DO NOT TOUCH THE AREA FOR 24HRS** **DO NOT WASH THE AREA FOR 7DAYS**
?9H hardness once cured! Other normal clear coats have a hardness generally of 2-4H.?Increased ability to polish light scratches out without weakening or damaging the original clear coat or paint.?Black Diamond Ceramic dramatically lowers the surface tension preventing contaminants like bird droppings, fuel, dirt, tar... from damaging your paint. Think of the ceramic coating as a sacrificial layer that can easily be reapplied. This ceramic coating is good for 5-7 years if maintained correctly.?For use on automotive paint, boat gel coats and hulls to break surface tension, resin tables, vinyl wraps...
상품설명
?1. Pre Wash ?2. Decontaminate surfaces ?3. Applying Black Diamond Ceramic Coating - Use proper skin protection - Apply in 2x2 (60cm x 60cm) sections - Apply 3-4 Drops of Black Diamond Ceramic Coating to a mico fiber cloth and apply using a cross hatch pattern * Wait 1-6 minutes depending on the temperature - Use light pressure to wipe away the excess coating - Check for excess coating "high spots" and lightly even out the coating. **DO NOT TOUCH THE AREA FOR 24HRS** **DO NOT WASH THE AREA FOR 7DAYS**
2020-08-02 18:18:15
