GM 14 BOLT HIGH CLEARANCE SHAVE COVER with (Metric Hardware)
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Increased Ground ClearanceLike all of our diff covers they are made from 3/8" plate and machined flat after they are welded to insure that you will have a flat surface for proper sealing to your axle.
상품설명
The 14 bolt is a great axle, they are inexpensive, strong, easy to find and affordable to build. However they have always had one down fall, the huge lip on the bottom that gets hung on ever thing on the trail. Barnes 4WD has come up with a solution to this issue, our GM 14 Bolt 3/8" Shave Cover. This cover will give you more than 1 1/4" of ground clearance, there is no need to have your gears turned or perform complicated welding or machining processes that only add more cost to your axle build. All that is required is to bolt the diff cover to your axle and cut off the extra lip. This can be done with simple tools, you can do it yourself and we GUARANTEE THEM FOR LIFE! Like all of our diff covers they are made from 3/8" plate and machined flat after they are welded to insure that you will have a flat surface for proper sealing to your axle. Recommended hardware torque is 25 Ft-Lbs. Note: This cover will come with Metric Hardware and is for use with ribbed 14 Bolt Axles If you have the non ribbed GM 14 Bolt Axle you\'ll need part # (B4W375101K-1)
Increased Ground ClearanceLike all of our diff covers they are made from 3/8" plate and machined flat after they are welded to insure that you will have a flat surface for proper sealing to your axle.
상품설명
The 14 bolt is a great axle, they are inexpensive, strong, easy to find and affordable to build. However they have always had one down fall, the huge lip on the bottom that gets hung on ever thing on the trail. Barnes 4WD has come up with a solution to this issue, our GM 14 Bolt 3/8" Shave Cover. This cover will give you more than 1 1/4" of ground clearance, there is no need to have your gears turned or perform complicated welding or machining processes that only add more cost to your axle build. All that is required is to bolt the diff cover to your axle and cut off the extra lip. This can be done with simple tools, you can do it yourself and we GUARANTEE THEM FOR LIFE! Like all of our diff covers they are made from 3/8" plate and machined flat after they are welded to insure that you will have a flat surface for proper sealing to your axle. Recommended hardware torque is 25 Ft-Lbs. Note: This cover will come with Metric Hardware and is for use with ribbed 14 Bolt Axles If you have the non ribbed GM 14 Bolt Axle you\'ll need part # (B4W375101K-1)
2019-11-25 17:12:19
