AY Customs Tesla Model 3 Carbon Fiber Functional Rear Deck Spoiler Ducktail Duckbill by Maier Racing in Collaboration (Small - 4")
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.Made with real Toray & Toho Carbon Fiber 3K TOE, 200gsm DryFunctional spoiler and tested in the Time Attack Global event at ButtonwillowResults were very positive dropping seconds off the lap times as consequence of high speed stabilityRear Spoiler extends off the trunk far enough to pick up some clean air providing downforce with limited drag to allow the driver to feel more comfortable at high speedsMade in the USA
상품설명
Size:Small - 4" We made these for a customer running in the Time Attack Global race event held at Buttonwillow, CA. The results we very positive dropping seconds off the lap times as a consequence of high speed stability. The rear spoiler extends off the trunk far enough to pick up some clean air and result in down-force with limited drag to allow the driver to feel more comfortable as high speeds. We make these here in California by hand. Our goal is to make perfect parts yet, subtle distortions in the weave or pin holes in the gel coat can happen. With the right materials, the install is relatively easy with: 3M adhesive promoter #06396 and double sided tape #06378. Details: We use plain weave Toray & Toho carbon fiber 3k TOE, 200gsm dry. This is woven by Composite Fabrics of America in Taylorsville, NC. We also use a layer of fiberglass in the middle for impact or damage stability. We use polyester resins & clear gel coat for Marine applications to address the UV stability. NOTE: We have made epoxy parts for years. Many will argue that epoxy is the only true quality product. I would have agreed PRIOR to this project. These parts see the daylight and sun year round. Very few products do well in the sunlight “even with” UV stabilizers. We have found the down side to epoxy is they don’t work well in the sun and with paints. Everyone says using Polyurethane paints over epoxy are the way to go. These statements are WAY to general and in our experience, not 100% accurate. While many people may wrinkle their noses at the polyester, we are rolling with it and believe this is the best material for the application. The large spoiler is: 4 lbs, 56″ long width of the trunk, by 7″ wide by 3.5″ tall. The smaller spoiler is: 3 lbs, 56″ long by 4″ wide by 2.75″ tall. **”Tall” is the size of the part. When this is installed, looking out the back window of the car is comp
Make sure this fits by entering your model number.Made with real Toray & Toho Carbon Fiber 3K TOE, 200gsm DryFunctional spoiler and tested in the Time Attack Global event at ButtonwillowResults were very positive dropping seconds off the lap times as consequence of high speed stabilityRear Spoiler extends off the trunk far enough to pick up some clean air providing downforce with limited drag to allow the driver to feel more comfortable at high speedsMade in the USA
상품설명
Size:Small - 4" We made these for a customer running in the Time Attack Global race event held at Buttonwillow, CA. The results we very positive dropping seconds off the lap times as a consequence of high speed stability. The rear spoiler extends off the trunk far enough to pick up some clean air and result in down-force with limited drag to allow the driver to feel more comfortable as high speeds. We make these here in California by hand. Our goal is to make perfect parts yet, subtle distortions in the weave or pin holes in the gel coat can happen. With the right materials, the install is relatively easy with: 3M adhesive promoter #06396 and double sided tape #06378. Details: We use plain weave Toray & Toho carbon fiber 3k TOE, 200gsm dry. This is woven by Composite Fabrics of America in Taylorsville, NC. We also use a layer of fiberglass in the middle for impact or damage stability. We use polyester resins & clear gel coat for Marine applications to address the UV stability. NOTE: We have made epoxy parts for years. Many will argue that epoxy is the only true quality product. I would have agreed PRIOR to this project. These parts see the daylight and sun year round. Very few products do well in the sunlight “even with” UV stabilizers. We have found the down side to epoxy is they don’t work well in the sun and with paints. Everyone says using Polyurethane paints over epoxy are the way to go. These statements are WAY to general and in our experience, not 100% accurate. While many people may wrinkle their noses at the polyester, we are rolling with it and believe this is the best material for the application. The large spoiler is: 4 lbs, 56″ long width of the trunk, by 7″ wide by 3.5″ tall. The smaller spoiler is: 3 lbs, 56″ long by 4″ wide by 2.75″ tall. **”Tall” is the size of the part. When this is installed, looking out the back window of the car is comp
2019-05-19 09:58:50
