Maxmoral 1PCS 3S 11.1V 12.6V 30A 18650 Lithium Battery PCB Protection Board Lipo Cell Module Enhance Version
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Type:Enhanced Version 3S 12.6V 30A Lithium Battery Protection PCB Board.Continuous discharge current(upper limit):30A(If the heat dissipation environment is not good, please reduce the load current);Continuous charging current (upper limit):20A.Charging voltage:12.6-13.6V;Size:40x50x3.4mm.Successful start of the drill requires 3 10C-20C power batteries,or 6 5C-10C power batteries,(recommended power battery models:SONY VTC4, VTC4A, VTC5A, VTC6),ordinary 18650 can not start the drill!!Note:Do not touch any components on the board when soldering the wire.With a good battery pack,good and bad batteries can not be mixed.
상품설명
Specification: Charging voltage:12.6-13.6V Continuous discharge current (upper limit):30A Continuous charging current (upper limit):20A Size:40x50x3.4mm Enhanced version: Suitable for electric drills with starting current below 60A, power below 130W, or resistive load below 378W. Package Included: 1X Enhanced 3S 12.6V 30A Lithium Battery Protection PCB Board Note 1: Successful start of the drill requires 3 10C-20C power batteries,or 6 5C-10C power batteries, (ordinary 18650 can not start the drill!!),0V and 12.6V cable,using 3 square millimeters Above copper wire (can not use nickel plate!!!). Note 2:Strictly connect 0V, 4.2V,8.4V,12.6V according to the diagram.Do not touch any components on the board when soldering the wire.Do not intentionally short circuit. Note 3:When soldering the battery for the first time or when charging,as long as the single battery exceeds 4.2V, the 430" resistor will generate heat and discharge (discharge to about 4.19V to stop heating.If the "430" resistor is severely heated (the heat is not enough Touch), please check if the wrong line is connected.
Type:Enhanced Version 3S 12.6V 30A Lithium Battery Protection PCB Board.Continuous discharge current(upper limit):30A(If the heat dissipation environment is not good, please reduce the load current);Continuous charging current (upper limit):20A.Charging voltage:12.6-13.6V;Size:40x50x3.4mm.Successful start of the drill requires 3 10C-20C power batteries,or 6 5C-10C power batteries,(recommended power battery models:SONY VTC4, VTC4A, VTC5A, VTC6),ordinary 18650 can not start the drill!!Note:Do not touch any components on the board when soldering the wire.With a good battery pack,good and bad batteries can not be mixed.
상품설명
Specification: Charging voltage:12.6-13.6V Continuous discharge current (upper limit):30A Continuous charging current (upper limit):20A Size:40x50x3.4mm Enhanced version: Suitable for electric drills with starting current below 60A, power below 130W, or resistive load below 378W. Package Included: 1X Enhanced 3S 12.6V 30A Lithium Battery Protection PCB Board Note 1: Successful start of the drill requires 3 10C-20C power batteries,or 6 5C-10C power batteries, (ordinary 18650 can not start the drill!!),0V and 12.6V cable,using 3 square millimeters Above copper wire (can not use nickel plate!!!). Note 2:Strictly connect 0V, 4.2V,8.4V,12.6V according to the diagram.Do not touch any components on the board when soldering the wire.Do not intentionally short circuit. Note 3:When soldering the battery for the first time or when charging,as long as the single battery exceeds 4.2V, the 430" resistor will generate heat and discharge (discharge to about 4.19V to stop heating.If the "430" resistor is severely heated (the heat is not enough Touch), please check if the wrong line is connected.
2020-01-06 05:23:55