Five Bananas Vehicle Blind Spot Detection System,Blind Spot Monitoring Assistant BSM BSD BSA 24Ghz Radar Detection System
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
?This system is a vehicle assistance device that helps driver lane changing safely during driving.?24GHz microwave sensor, probe the side/rear of the vehicle for those moving objects into the blind spot of the detection zone.?The detector can perform signal processing independently, and the response time is only 0.5 milliseconds.?The system continues working for 40 seconds after the car is turned off, before this time, the system will normally warn when the moving object approaches.?Prompt Mode Adjustment: 1.LED light turns on; 2.LED flash and buzzer sound(Buzzer Sound Off-Low-High Adjustable).
상품설명
Product Features: Name: Vehicle Blind Spot Detection System(BSD) Electricity Voltage:12V Maximum Power:5W (max) Working Temperature:-40 degree +85 degree Storage Temperature:-40 degree +85 degree Waterproof level: IP67 Detection Range: Lateral Distance:0.3m - 4m Rear side Distance: 0.3m-11m. Detection Range Accuracy:>96% Alarm Range: 0.3m-11m System Alarm Accuracy:>96% Alarm method: Method 1 LED light turns on. Method 2 LED flash and buzzer sound About installation(Recommended for professional people to install): 1. Please prepare necessary disassembly tool and protective bumper painted sponge pad or cloth pad. 2. When you disassemble connector, MUST NOT pull wire harness in force, otherwise, will break the harness. Please plug in connector until it practically tightened (you can hear the sound of "Click"). 3. The wire harness should be fixed with the car cable harness by tie band. Neither droop nor abnormal sound. Cut off, excess tie band. 4. Disassemble and assemble procedure, please strictly follow our installation manual. Try not to break parts as careful as possible. In case of breakage, please change the parts immediately. Note: Microwave sensor installation cautions points(We do not send the glue): 1. Microwave sensor (signal launching surface) can only penetrate the plastic bumper case. 2. Microwave sensor (signal launching surface) in the front, must be no metal intervention. 3. Don't install microwave sensor opposite to fluorescent light. Package Included: 1x BSD SYSTEM(Glue not included)
?This system is a vehicle assistance device that helps driver lane changing safely during driving.?24GHz microwave sensor, probe the side/rear of the vehicle for those moving objects into the blind spot of the detection zone.?The detector can perform signal processing independently, and the response time is only 0.5 milliseconds.?The system continues working for 40 seconds after the car is turned off, before this time, the system will normally warn when the moving object approaches.?Prompt Mode Adjustment: 1.LED light turns on; 2.LED flash and buzzer sound(Buzzer Sound Off-Low-High Adjustable).
상품설명
Product Features: Name: Vehicle Blind Spot Detection System(BSD) Electricity Voltage:12V Maximum Power:5W (max) Working Temperature:-40 degree +85 degree Storage Temperature:-40 degree +85 degree Waterproof level: IP67 Detection Range: Lateral Distance:0.3m - 4m Rear side Distance: 0.3m-11m. Detection Range Accuracy:>96% Alarm Range: 0.3m-11m System Alarm Accuracy:>96% Alarm method: Method 1 LED light turns on. Method 2 LED flash and buzzer sound About installation(Recommended for professional people to install): 1. Please prepare necessary disassembly tool and protective bumper painted sponge pad or cloth pad. 2. When you disassemble connector, MUST NOT pull wire harness in force, otherwise, will break the harness. Please plug in connector until it practically tightened (you can hear the sound of "Click"). 3. The wire harness should be fixed with the car cable harness by tie band. Neither droop nor abnormal sound. Cut off, excess tie band. 4. Disassemble and assemble procedure, please strictly follow our installation manual. Try not to break parts as careful as possible. In case of breakage, please change the parts immediately. Note: Microwave sensor installation cautions points(We do not send the glue): 1. Microwave sensor (signal launching surface) can only penetrate the plastic bumper case. 2. Microwave sensor (signal launching surface) in the front, must be no metal intervention. 3. Don't install microwave sensor opposite to fluorescent light. Package Included: 1x BSD SYSTEM(Glue not included)
2019-11-14 10:04:09