Belt-to-Chain Conversion Kit - Fits 1991-1999 Harley Sportster XL Models - 22 Tooth Front Sprocket / 48 Tooth Rear Sprocket for 530x120 Chain (19-0456)
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.Fits 1991-1999 Harley Sportster XL models while maintaining stock gearing ratio.Black 23 tooth front sprocket with a .500" offset.Includes sprocket nut with locking holes to ensure that the sprocket stays tight.51 tooth rear sprocket with a 9.8mm offset (Includes wheel spacer with 2.1" ID)Fits 1970-1984 Shovelheads and 1984-1999 "EVO" Evolution Big Twin Motors (Except Twin Cam and EFI Models.)
상품설명
Belt to Chain conversion kit - 22/48 Fits 1991-1999 Harley Sportster XL models while maintaining stock gearing ratio. Features: Black 22 tooth front sprocket with a .500" offset. Includes a sprocket nut with locking holes to ensure that the sprocket stays tight. 48 tooth rear sprocket with a 9.8mm offset (Includes wheel spacer with 2-1/16" ID) Designed to fit 1991-1999 Harley Sportster XL models while maintaining stock gearing ratio. Also available for other years and models. NOTE: These are made for use in a stock Sportster frame or a frame or hardtail which uses stock spacing (such as hardtails which use the stock rear wheel assembly, brake, and axle spacers). If the frame you are using is a different axle plate spacing (width) or you are using a non-stock wheel this may affect the rear sprocket alignment. This is for use with a stock width wheel, and is not for a wide tire conversion. NOTE: Remember a larger sprocket on rear means more torque (geared down) and a larger front sprocket means higher gears, more top end. NOTE: Because of tight clearance when using stock muffler mount or stock passenger peg mounts do not use an O-ring chain because the additional width may cause chain to wear at these components on deceleration. Finish: Front Sprocket - Black Rear Sprocket - Chrome Fitment: Designed to fit 1991-1999 Harley Sportster XL models while maintaining stock gearing ratio.
Make sure this fits by entering your model number.Fits 1991-1999 Harley Sportster XL models while maintaining stock gearing ratio.Black 23 tooth front sprocket with a .500" offset.Includes sprocket nut with locking holes to ensure that the sprocket stays tight.51 tooth rear sprocket with a 9.8mm offset (Includes wheel spacer with 2.1" ID)Fits 1970-1984 Shovelheads and 1984-1999 "EVO" Evolution Big Twin Motors (Except Twin Cam and EFI Models.)
상품설명
Belt to Chain conversion kit - 22/48 Fits 1991-1999 Harley Sportster XL models while maintaining stock gearing ratio. Features: Black 22 tooth front sprocket with a .500" offset. Includes a sprocket nut with locking holes to ensure that the sprocket stays tight. 48 tooth rear sprocket with a 9.8mm offset (Includes wheel spacer with 2-1/16" ID) Designed to fit 1991-1999 Harley Sportster XL models while maintaining stock gearing ratio. Also available for other years and models. NOTE: These are made for use in a stock Sportster frame or a frame or hardtail which uses stock spacing (such as hardtails which use the stock rear wheel assembly, brake, and axle spacers). If the frame you are using is a different axle plate spacing (width) or you are using a non-stock wheel this may affect the rear sprocket alignment. This is for use with a stock width wheel, and is not for a wide tire conversion. NOTE: Remember a larger sprocket on rear means more torque (geared down) and a larger front sprocket means higher gears, more top end. NOTE: Because of tight clearance when using stock muffler mount or stock passenger peg mounts do not use an O-ring chain because the additional width may cause chain to wear at these components on deceleration. Finish: Front Sprocket - Black Rear Sprocket - Chrome Fitment: Designed to fit 1991-1999 Harley Sportster XL models while maintaining stock gearing ratio.
2021-07-24 14:57:50
