12x2 inch Belt Grinder Rubber Wheel Serrated Rubber Contact Wheel 6206 Bearing Belt Grinder Wheel
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.This Rubber wheel is 12inch in diameter and 2 inch in wide; Bearing: 6206; Bearing bore diameter: 30mm(1.18 Inch) , outer diameter: 62mm(2.44 Inch).This 12" wheel is ideal for hollow-grinding straight razors, pocket knives, hunting knives, small axes etc.Serrated Contact Wheel material: Precision aluminum wheel with rubber coating.Serrated and dynamically balanced grinder wheel, comes with bearings pressed in.Belt Grinder Rubber Wheel includes sealed bearings which can easily be replaced when worn.
상품설명
Color:12"x2"Rubber Wheel Specification & Feature: Contact wheel- The lower wheel in a set up that is used for hollow grinding. It may be either a driven or idler wheel, depending on your set up, usually driven.If an idler it will either have bearings in it so it may spin on a fixed shaft or be keyed to a shaft that spins. Idler wheel- A wheel that has bearings in it or is secured to a shaft that spins in bearings and is driven by the sanding belt, not shaft or motor Drive wheel- A wheel that does not have bearings in it and is secured to the shaft, either directly to a motor shaft or to a shaft driven by a pulley or coupling. The drive wheel is often keyed to the shaft with a 3/16" woodruff or square key. Drive wheels, by definition, never have bearings in them. *Condition: 100% Brand New and High Quality *Serrated rubber contact wheel for belt grinder *Standard sizes - 12" diameter x 2" wide *Fits 2" wide sanding belts *These come with 1.18" (30 mm)I.D. bearings for a 1.18" (30 mm) bolt *Comes with bearings pressed in *Bearing model: 6206 *Hardness 75 Duro(the most widely used grinding wheels hardness used by the knife makers) *Recommended running speed for this wheel should be around 800-3600 RPM’s *Shaft locking bearings allow aligning the contact wheel with the other wheels on the machine much easier than using other mounting systems Application: This brand new 12" Serrated Rubber Contact Wheel is commonly used on 2x72 grinders for knife making etc. It is also a perfect choice for hollow-grinding straight razor, poket knives, hunting knives, axes etc. Package Includes: 1 x 12" Contact wheel
Make sure this fits by entering your model number.This Rubber wheel is 12inch in diameter and 2 inch in wide; Bearing: 6206; Bearing bore diameter: 30mm(1.18 Inch) , outer diameter: 62mm(2.44 Inch).This 12" wheel is ideal for hollow-grinding straight razors, pocket knives, hunting knives, small axes etc.Serrated Contact Wheel material: Precision aluminum wheel with rubber coating.Serrated and dynamically balanced grinder wheel, comes with bearings pressed in.Belt Grinder Rubber Wheel includes sealed bearings which can easily be replaced when worn.
상품설명
Color:12"x2"Rubber Wheel Specification & Feature: Contact wheel- The lower wheel in a set up that is used for hollow grinding. It may be either a driven or idler wheel, depending on your set up, usually driven.If an idler it will either have bearings in it so it may spin on a fixed shaft or be keyed to a shaft that spins. Idler wheel- A wheel that has bearings in it or is secured to a shaft that spins in bearings and is driven by the sanding belt, not shaft or motor Drive wheel- A wheel that does not have bearings in it and is secured to the shaft, either directly to a motor shaft or to a shaft driven by a pulley or coupling. The drive wheel is often keyed to the shaft with a 3/16" woodruff or square key. Drive wheels, by definition, never have bearings in them. *Condition: 100% Brand New and High Quality *Serrated rubber contact wheel for belt grinder *Standard sizes - 12" diameter x 2" wide *Fits 2" wide sanding belts *These come with 1.18" (30 mm)I.D. bearings for a 1.18" (30 mm) bolt *Comes with bearings pressed in *Bearing model: 6206 *Hardness 75 Duro(the most widely used grinding wheels hardness used by the knife makers) *Recommended running speed for this wheel should be around 800-3600 RPM’s *Shaft locking bearings allow aligning the contact wheel with the other wheels on the machine much easier than using other mounting systems Application: This brand new 12" Serrated Rubber Contact Wheel is commonly used on 2x72 grinders for knife making etc. It is also a perfect choice for hollow-grinding straight razor, poket knives, hunting knives, axes etc. Package Includes: 1 x 12" Contact wheel
2019-09-14 11:05:51