DC 12V Electronic Load Tester Module 0-20A 250W Battery Capacity Tester Module Constant Current Electric Discharge Monitor for Testing Discharge Board Burn-in Module
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.✔High Performance: This electronic load tester uses original IR power tube and double high-speed ball bearing fan, with big fin heat sink, which is not afraid of dust and can guarantee the stability for a long time use, power redundancy is no less than 50% (25℃).✔Classical Digital Tube Display: This electronic load tester uses classical digital tube display, which is intuitive and durable, compared to LCD, it is more resistant to high temperature.✔Display Voltage and Current: This electronic load tester can display voltage and current when discharging constant current, visually reflecting the discharge conditions.✔Separated Wiring Connectors: Voltage and current wiring connectors are separated, with appropriate connection, it can eliminate the influence of wire resistance to voltage.✔Application: 100% power burn-in in factory, This electronic load tester is suitable for assembly of power adapter fully-automatic burn-in cabinet.
상품설명
Specifications: Power Supply Voltage: DC12V(±5%) (equipment supply voltage) Maximum Load Voltage: 100V Constant Current Discharge Adjusting Range: 0-20A Work Mode: Constant current mode (CC) Maximum Discharge Current Error: 0.7%-0.01A Maximum Discharge Power: 250W Size: 13*9*11.5cm/5.1*3.5*4.5in Weight: 879g(approx.) Instruction: 1. Connect to 12V power supply then power on to electronic load mode. Make sure it is at stop condition (knob clockwise is minimum) then connect the tested power supply to the input power port, pay attention to the polarity. 2. Rotate knob to set constant current. Package Includes: 1 x Electronic Load Note: Since it works openly, there is no voltage and power limitation, but normal work should be below 100V, 250W.
Make sure this fits by entering your model number.✔High Performance: This electronic load tester uses original IR power tube and double high-speed ball bearing fan, with big fin heat sink, which is not afraid of dust and can guarantee the stability for a long time use, power redundancy is no less than 50% (25℃).✔Classical Digital Tube Display: This electronic load tester uses classical digital tube display, which is intuitive and durable, compared to LCD, it is more resistant to high temperature.✔Display Voltage and Current: This electronic load tester can display voltage and current when discharging constant current, visually reflecting the discharge conditions.✔Separated Wiring Connectors: Voltage and current wiring connectors are separated, with appropriate connection, it can eliminate the influence of wire resistance to voltage.✔Application: 100% power burn-in in factory, This electronic load tester is suitable for assembly of power adapter fully-automatic burn-in cabinet.
상품설명
Specifications: Power Supply Voltage: DC12V(±5%) (equipment supply voltage) Maximum Load Voltage: 100V Constant Current Discharge Adjusting Range: 0-20A Work Mode: Constant current mode (CC) Maximum Discharge Current Error: 0.7%-0.01A Maximum Discharge Power: 250W Size: 13*9*11.5cm/5.1*3.5*4.5in Weight: 879g(approx.) Instruction: 1. Connect to 12V power supply then power on to electronic load mode. Make sure it is at stop condition (knob clockwise is minimum) then connect the tested power supply to the input power port, pay attention to the polarity. 2. Rotate knob to set constant current. Package Includes: 1 x Electronic Load Note: Since it works openly, there is no voltage and power limitation, but normal work should be below 100V, 250W.
2020-08-05 13:10:09
