KKmoon Vector Network Analyzer, Portable Handheld Vector Network Analyzer 50KHz-900MHz Digital Display Touching Screen Shortwave MF HF VHF UHF Antenna Analyzer Standing Wave (Battery not Included)
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.✍✎‿◕The PC control software can export Touchstone (snp) files, which can be used for various radio design and simulation software.✍✎‿◕The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 900MHz.✍✎‿◕The 50k-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic.✍✎‿◕The extended 300M-600MHz band provides better than 50dB of dynamics, and the 600M-900M band is better than 40dB of dynamics.✍✎‿◕The metal shield is designed to reduce the external interference and improve the measurement accuracy. Small and portable, easy to use, this project aims to provide an RF gadget but useful instrument for enthusiast.
상품설명
Size:Type 1 | Color:Black ◕‿◕This is a DIY product with vector network measurement function. It includes a 2.8-inch touching screen, TX/RX measurement, can determine the complete S11 and S21 parameters, if you need to get S12 and S22, you need to manually replace the transceiver port wiring. ◕‿◕Specifications: ▶Material: PCB ▶Color: black ▶Measurement frequency: 50KHz~300MHz (50KHz~900MHz, enable extended firmware)(the products will be updated with the latest firmware before shipping, the actual measurement frequency is 50KHz~900MHz) ▶RF output: -13dbm (maximum -9dbm) ▶Frequency accuracy: <0.5ppm ▶Measurement range: 70dB (50KHz-300MHz), (50dB (300M-600MHz), 40dB (600M-900MHz) enable extended firmware) ▶Port SWR: <1.1 ▶Display: 2.8 inch TFT (320*240) ▶USB interface: USB type-C ▶Communication mode: CDC (serial) ▶Power: USB 5V 120mA, can use battery powered, maximum charging current 0.8A (battery not included) ▶Number of calibration points: 101 (fixed) ▶Number of scanning points: 101 (fixed) ▶Display tracking: 4, Marking: 4, Setting save: 5 ▶PCB size: 85.5 * 54 * 11mm / 3.4 * 2.1 * 0.4in (without connectors and switches) ▶Package size: 120 * 78 * 40mm / 4.7 * 3.1 * 1.6in ▶Package weight: 152g / 5.4ounce ◕‿◕Note: ▶Batteries are not included because of the safety of international transportation. But we have reserved a power management IC, you can weld your own batteries. Or use other power sources, such as power bank, to supply power to it through USB interface. ▶This product is only suitable for 50 ohm load, otherwise it will affect the normal use of the product and data reading. ◕‿◕Package list: ▶1 * Host ▶1 * USB Type-C Data Cable ▶2 * 30mm SMA Male to Male Cable ▶1 * SMA Female to Female Connector
Make sure this fits by entering your model number.✍✎‿◕The PC control software can export Touchstone (snp) files, which can be used for various radio design and simulation software.✍✎‿◕The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 900MHz.✍✎‿◕The 50k-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic.✍✎‿◕The extended 300M-600MHz band provides better than 50dB of dynamics, and the 600M-900M band is better than 40dB of dynamics.✍✎‿◕The metal shield is designed to reduce the external interference and improve the measurement accuracy. Small and portable, easy to use, this project aims to provide an RF gadget but useful instrument for enthusiast.
상품설명
Size:Type 1 | Color:Black ◕‿◕This is a DIY product with vector network measurement function. It includes a 2.8-inch touching screen, TX/RX measurement, can determine the complete S11 and S21 parameters, if you need to get S12 and S22, you need to manually replace the transceiver port wiring. ◕‿◕Specifications: ▶Material: PCB ▶Color: black ▶Measurement frequency: 50KHz~300MHz (50KHz~900MHz, enable extended firmware)(the products will be updated with the latest firmware before shipping, the actual measurement frequency is 50KHz~900MHz) ▶RF output: -13dbm (maximum -9dbm) ▶Frequency accuracy: <0.5ppm ▶Measurement range: 70dB (50KHz-300MHz), (50dB (300M-600MHz), 40dB (600M-900MHz) enable extended firmware) ▶Port SWR: <1.1 ▶Display: 2.8 inch TFT (320*240) ▶USB interface: USB type-C ▶Communication mode: CDC (serial) ▶Power: USB 5V 120mA, can use battery powered, maximum charging current 0.8A (battery not included) ▶Number of calibration points: 101 (fixed) ▶Number of scanning points: 101 (fixed) ▶Display tracking: 4, Marking: 4, Setting save: 5 ▶PCB size: 85.5 * 54 * 11mm / 3.4 * 2.1 * 0.4in (without connectors and switches) ▶Package size: 120 * 78 * 40mm / 4.7 * 3.1 * 1.6in ▶Package weight: 152g / 5.4ounce ◕‿◕Note: ▶Batteries are not included because of the safety of international transportation. But we have reserved a power management IC, you can weld your own batteries. Or use other power sources, such as power bank, to supply power to it through USB interface. ▶This product is only suitable for 50 ohm load, otherwise it will affect the normal use of the product and data reading. ◕‿◕Package list: ▶1 * Host ▶1 * USB Type-C Data Cable ▶2 * 30mm SMA Male to Male Cable ▶1 * SMA Female to Female Connector
2019-12-20 12:30:37