Tractel C003K - Phoenix 3 ft. (.9 m) Shock-Absorbing Safety Lanyard with 3/4 in. OSHA ANSI Fall Arrest Protection Equipment self-locking snap hook - both ends - one leg
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.3 ft. (0.9 m) with 3⁄4 in. (20 mm) self-locking snap hook; both endsLightweightComplies with: ANSI Z359.01-2007 ANSI A10.32-2012 OSHA 1926 OSHA 1910
상품설명
The Phoenix 3-feet shock-absorbing Lanyard with 3/4-Inch self-locking snap hooks both ends. The purpose of this lanyard helps lower impact force experienced in a fall displacing kinetic energy. When a fall occurs, the sudden stop caused by the fall arrest system submits the human body to a high impact force (the longer the free fall distance, the greater the force). The purpose of the shock absorber is to lower the impact force experienced in a fall by dissipating the kinetic energy and controlling deceleration. The shock-absorbing device is made of a specially woven webbing that elongates through tearing on its weave and stitching. This action limits the impact force to less than 900-Pounds (4 kN). The dual arm model allows the worker to remain safely connected at all time (100% tie-off) while climbing or on the move. APPLICABLE STANDARDS: ANSI Z359. 01-2007 ANSI A10. 32-2012 OSHA 1926 OSHA 1910
Make sure this fits by entering your model number.3 ft. (0.9 m) with 3⁄4 in. (20 mm) self-locking snap hook; both endsLightweightComplies with: ANSI Z359.01-2007 ANSI A10.32-2012 OSHA 1926 OSHA 1910
상품설명
The Phoenix 3-feet shock-absorbing Lanyard with 3/4-Inch self-locking snap hooks both ends. The purpose of this lanyard helps lower impact force experienced in a fall displacing kinetic energy. When a fall occurs, the sudden stop caused by the fall arrest system submits the human body to a high impact force (the longer the free fall distance, the greater the force). The purpose of the shock absorber is to lower the impact force experienced in a fall by dissipating the kinetic energy and controlling deceleration. The shock-absorbing device is made of a specially woven webbing that elongates through tearing on its weave and stitching. This action limits the impact force to less than 900-Pounds (4 kN). The dual arm model allows the worker to remain safely connected at all time (100% tie-off) while climbing or on the move. APPLICABLE STANDARDS: ANSI Z359. 01-2007 ANSI A10. 32-2012 OSHA 1926 OSHA 1910
2021-10-08 20:10:20