SEM 15033, Saddle Tan, Color Coat, Vinyl Paint (2)
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.12 oz Aerosol CanCovers Approximately 10 square feetRestore or change the color of vinyl, carpet, properly prepped and primed metal, velour, and plastic
상품설명
Item Package Quantity:2 The SEM 15033, Saddle Tan, Color Coat Vinyl Paint is designed to restore or change the color of vinyl, carpet, properly prepped and primed metal, velour, and plastic. It is used to refinish vehicle interiors and motorcycle seats. All Color Coats are very simple to use and quick to dry. They are very elastomeric and will not crack. SEM Color Coat Surface Preparation: 1. Clean, Clean, Clean!!! I can't stress enough how the surface being sprayed must be Very clean!! Use Hot Soapy water wherever you can. Using SEM 39362 SEM Soap scrub the surface and rinse with water. Blow dry or towel dry then clean the surface with SEM 38343 Vinyl Prep or SEM 38353 Plastic Prep. If the surface isn't clean the product won't stick. 2. For plastic surfaces you will need to use a plastic adhesion promoter. SEM 39863 Plastic Adhesion Promoter or SEM 38363 Sand Free both work well. Apply per manufacturer instructions. 3. Color Coat may then be applied in light even coats. Several light coats work, with 5-10 minutes between coats, much better than one heavy coat. 4. For added protection or change of sheen, apply one of Sem's clear coats. SEM 13003 High Gloss, SEM 13013 Satin Gloss, SEM 13023 Low Luster. 5. Product will be dry to touch in approximately 10 minutes. The substrate should not be subject to heavy abuse or abrasion for a 24 hour period minimum.
Make sure this fits by entering your model number.12 oz Aerosol CanCovers Approximately 10 square feetRestore or change the color of vinyl, carpet, properly prepped and primed metal, velour, and plastic
상품설명
Item Package Quantity:2 The SEM 15033, Saddle Tan, Color Coat Vinyl Paint is designed to restore or change the color of vinyl, carpet, properly prepped and primed metal, velour, and plastic. It is used to refinish vehicle interiors and motorcycle seats. All Color Coats are very simple to use and quick to dry. They are very elastomeric and will not crack. SEM Color Coat Surface Preparation: 1. Clean, Clean, Clean!!! I can't stress enough how the surface being sprayed must be Very clean!! Use Hot Soapy water wherever you can. Using SEM 39362 SEM Soap scrub the surface and rinse with water. Blow dry or towel dry then clean the surface with SEM 38343 Vinyl Prep or SEM 38353 Plastic Prep. If the surface isn't clean the product won't stick. 2. For plastic surfaces you will need to use a plastic adhesion promoter. SEM 39863 Plastic Adhesion Promoter or SEM 38363 Sand Free both work well. Apply per manufacturer instructions. 3. Color Coat may then be applied in light even coats. Several light coats work, with 5-10 minutes between coats, much better than one heavy coat. 4. For added protection or change of sheen, apply one of Sem's clear coats. SEM 13003 High Gloss, SEM 13013 Satin Gloss, SEM 13023 Low Luster. 5. Product will be dry to touch in approximately 10 minutes. The substrate should not be subject to heavy abuse or abrasion for a 24 hour period minimum.
2019-12-01 15:31:06