KKmon NanoVNA-F Portable Handheld Vector Network Analyzer SWR Meter 50KHz-1000MHz 4.3 Inch IPS TFT Digital Display Touching Screen Shortwave MF HF VHF Antenna Analyzer
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number./◕‿◕/Use 4.3-inch IPS TFT LCD and resistive touching screen, with a larger view angle and can be seen clearly in strong outdoor light. Use a larger and better operating level. Use a larger and better operating power switch./◕‿◕/Standard aluminium housing to protect SMAhead and reduce the interference of external electromagnetic wave to instrument. The RF front end is designed with a metal shield that allows the S21 to have a dynamic range better than 60dB over the full frequency range./◕‿◕/The NanoVNA-F measurement range is 50k-1GHz. Use the harmonic of the clock chip SI5351 to measure frequency up to 1000MHz. At 600M-1GHz, the S11 has a dynamic range of 40dB (the standing wave ratio is less than 1.02)./◕‿◕/Switch to a large capacity 5000mAh/3.7V lithium battery, longer standby time, and expand a USB interface. Usually, it can be used as a power bank when the instrument is not used. Support Chinese and English menu switching./◕‿◕/The Lipo charing IC to be changed to IP5306 (with 2A high charing current), making the charging time shorter. Upgrade the user program by virtual U disk (16MB SPI flash memory inside).
상품설명
Size:without battery ◕‿◕NanoVNA-F "Handheld Vector Network Analyzer" is a product based on the open source project of NanoVNA, which is more professional and practical. It includes a 4.3-inch IPS TFT LCD touching screen for clearer. ◕‿◕Specifications: ★ Main material: PCB ★ Color: black ★ Type: with battery, without battery (optional) ★ Battery: 1 * lithium battery, 3.7V, 5000mAh ★ Measurement frequency: 50KHz~1000MHz ★ RF output: -13dBm (Max.-9dBm) ★ Frequency accuracy: <0.5PPM ★ Port SWR: ＜1.1 ★ Display: 4.3 inch IPS TFT (800*480) ★ USB interface: USB Type-C ★ Communication mode: CDC (serial) ★ Power consumption: USB 5V 200mA, can use battery powered, maximum charging current 2A ★ Output capacity: 5V/1A ★ Number of calibration points: 101 ★ Number of scanning points: 101 ★ Display tracking: 4, Marking: 4, Setting save: 5 ★ Scanning time: about 1.9s/time (50KHz~1000MHz full frequency band) ★ Can measure S parameters, voltage standing wave ratio SWR, phase map, group delay, Smith chart and so on. ★ Item size: 140 * 75 * 20mm / 5.5 * 3.0 * 0.8in ★ Package size: 145 * 85 * 30mm / 5.7 * 3.3 * 1.2in ★ Package weight: 600g / 1.3lb ◕‿◕Package list: 1 * Host 2 * 200mm SMA-JJ RG316 Cable 1 * Set of Calibration Parts 1 * SMA-JJ Double Needle 1 * SMA Elbow (external screw inner hole to inner screw inner needle) 1 * Type-C Data Cable
Make sure this fits by entering your model number./◕‿◕/Use 4.3-inch IPS TFT LCD and resistive touching screen, with a larger view angle and can be seen clearly in strong outdoor light. Use a larger and better operating level. Use a larger and better operating power switch./◕‿◕/Standard aluminium housing to protect SMAhead and reduce the interference of external electromagnetic wave to instrument. The RF front end is designed with a metal shield that allows the S21 to have a dynamic range better than 60dB over the full frequency range./◕‿◕/The NanoVNA-F measurement range is 50k-1GHz. Use the harmonic of the clock chip SI5351 to measure frequency up to 1000MHz. At 600M-1GHz, the S11 has a dynamic range of 40dB (the standing wave ratio is less than 1.02)./◕‿◕/Switch to a large capacity 5000mAh/3.7V lithium battery, longer standby time, and expand a USB interface. Usually, it can be used as a power bank when the instrument is not used. Support Chinese and English menu switching./◕‿◕/The Lipo charing IC to be changed to IP5306 (with 2A high charing current), making the charging time shorter. Upgrade the user program by virtual U disk (16MB SPI flash memory inside).
상품설명
Size:without battery ◕‿◕NanoVNA-F "Handheld Vector Network Analyzer" is a product based on the open source project of NanoVNA, which is more professional and practical. It includes a 4.3-inch IPS TFT LCD touching screen for clearer. ◕‿◕Specifications: ★ Main material: PCB ★ Color: black ★ Type: with battery, without battery (optional) ★ Battery: 1 * lithium battery, 3.7V, 5000mAh ★ Measurement frequency: 50KHz~1000MHz ★ RF output: -13dBm (Max.-9dBm) ★ Frequency accuracy: <0.5PPM ★ Port SWR: ＜1.1 ★ Display: 4.3 inch IPS TFT (800*480) ★ USB interface: USB Type-C ★ Communication mode: CDC (serial) ★ Power consumption: USB 5V 200mA, can use battery powered, maximum charging current 2A ★ Output capacity: 5V/1A ★ Number of calibration points: 101 ★ Number of scanning points: 101 ★ Display tracking: 4, Marking: 4, Setting save: 5 ★ Scanning time: about 1.9s/time (50KHz~1000MHz full frequency band) ★ Can measure S parameters, voltage standing wave ratio SWR, phase map, group delay, Smith chart and so on. ★ Item size: 140 * 75 * 20mm / 5.5 * 3.0 * 0.8in ★ Package size: 145 * 85 * 30mm / 5.7 * 3.3 * 1.2in ★ Package weight: 600g / 1.3lb ◕‿◕Package list: 1 * Host 2 * 200mm SMA-JJ RG316 Cable 1 * Set of Calibration Parts 1 * SMA-JJ Double Needle 1 * SMA Elbow (external screw inner hole to inner screw inner needle) 1 * Type-C Data Cable
2019-12-20 14:25:53
