MakerFocus WiFi Test Tool ESP8266 WiFi Deauther Watch DSTIKE NodeMCU ESP8266 Programmable Development Board Built in 500mAh Battery with OLED Dispaly, Wristband and 3D Printing Case
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.Deauther Watch: It is an ESP8266 development board, but you can wear it like a smartwatch, more convenient. NOTE: Using it only for testing and educational purposes against your own devices! Use Manual and Video: Please get the link from the product description belowWifi Testing Tool: This esp8266 dev board is installed with the latest ESP8266 Deauther software. With this software, you can perform different secure tests for your WiFi networks. NOTE: ESP8266 supports 2.4GHz onlyLong Working Time: Built-in an 500mAh lithium battery, working time up to 7 hours. Comes with OLED display and a 3 way momentary slide switchExtension Board: You can use it to develop your own software. It is indeed a ESP8266 development board and easy to operateDisclaimer: This is a tool. It's neither good nor bad. Use it to do good, to study and to test. Never use it to do harm or create damage! Use it only for testing and educational purposes against your own devices! I don't take responsibility for what you do with it. Please check the legal regulations for your country to make sure you don't violate any laws
상품설명
What is it? Use Manual and Video: https://drive.google.com/file/d/19oeOZ2BApy06QAghJnAYH7FmPXKMon8h/view Deauther Watch is an ESP8266 development board, but you can wear it like a smartwatch. It comes with a 500mAh lithium battery, OLED display and a 3-way momentary slide switch. It comes installed with the latest ESP8266 Deauther software. With this software, you can perform different attacks to test WiFi networks. You can also use it to develop your own software. It is simple to use, just like any other ESP8266 development board. Note: Only support 2.4GHz DSTIKE Deauther Watch and ESP32 Watch share the same screen board, but pinmap and breakout pads are different! What makes it special? Only ~80mA power usage Up to around 7 hours work time 200 mA charging current Indicate charging LED (Red means charging, off means full) Included 8dB antenna and 2dB antenna Power Switch (Strongly recommend turn it off when charging) Protection: short, overcharging, over discharging, temperature GPIOs and Hardware Info: Display: SH1106 1.3" OLED Display SDA: GPIO 5 (D1) Display SCL/SCK: GPIO 4 (D2) WS2812b LED: GPIO 15 (D8) Button Up: GPIO 12 Button Down: GPIO 13 Button Select: GPIO 14 High Light LED: GPIO 16 Side Button: GPIO0, GPIO2, RST Usage: 1.You can use it with display and buttons: https://github.com/spacehuhn/esp8266_deauther/wiki/Setup-Display-&-Buttons 2. You can also connect to "pwned" with the password "deauther" and use the web interface: https://github.com/spacehuhn/esp8266_deauther/wiki/Web 3. If you lost the password you can reset it: https://github.com/spacehuhn/esp8266_deauther/wiki/FAQhow-to-do-a-reset. Package Including: 1 * ESP8266 WiFi Deauther Watch with 3D Printing Case and 500mAh lithium battery (Assembled) 1 * 5db FPC Antenna
Make sure this fits by entering your model number.Deauther Watch: It is an ESP8266 development board, but you can wear it like a smartwatch, more convenient. NOTE: Using it only for testing and educational purposes against your own devices! Use Manual and Video: Please get the link from the product description belowWifi Testing Tool: This esp8266 dev board is installed with the latest ESP8266 Deauther software. With this software, you can perform different secure tests for your WiFi networks. NOTE: ESP8266 supports 2.4GHz onlyLong Working Time: Built-in an 500mAh lithium battery, working time up to 7 hours. Comes with OLED display and a 3 way momentary slide switchExtension Board: You can use it to develop your own software. It is indeed a ESP8266 development board and easy to operateDisclaimer: This is a tool. It's neither good nor bad. Use it to do good, to study and to test. Never use it to do harm or create damage! Use it only for testing and educational purposes against your own devices! I don't take responsibility for what you do with it. Please check the legal regulations for your country to make sure you don't violate any laws
상품설명
What is it? Use Manual and Video: https://drive.google.com/file/d/19oeOZ2BApy06QAghJnAYH7FmPXKMon8h/view Deauther Watch is an ESP8266 development board, but you can wear it like a smartwatch. It comes with a 500mAh lithium battery, OLED display and a 3-way momentary slide switch. It comes installed with the latest ESP8266 Deauther software. With this software, you can perform different attacks to test WiFi networks. You can also use it to develop your own software. It is simple to use, just like any other ESP8266 development board. Note: Only support 2.4GHz DSTIKE Deauther Watch and ESP32 Watch share the same screen board, but pinmap and breakout pads are different! What makes it special? Only ~80mA power usage Up to around 7 hours work time 200 mA charging current Indicate charging LED (Red means charging, off means full) Included 8dB antenna and 2dB antenna Power Switch (Strongly recommend turn it off when charging) Protection: short, overcharging, over discharging, temperature GPIOs and Hardware Info: Display: SH1106 1.3" OLED Display SDA: GPIO 5 (D1) Display SCL/SCK: GPIO 4 (D2) WS2812b LED: GPIO 15 (D8) Button Up: GPIO 12 Button Down: GPIO 13 Button Select: GPIO 14 High Light LED: GPIO 16 Side Button: GPIO0, GPIO2, RST Usage: 1.You can use it with display and buttons: https://github.com/spacehuhn/esp8266_deauther/wiki/Setup-Display-&-Buttons 2. You can also connect to "pwned" with the password "deauther" and use the web interface: https://github.com/spacehuhn/esp8266_deauther/wiki/Web 3. If you lost the password you can reset it: https://github.com/spacehuhn/esp8266_deauther/wiki/FAQhow-to-do-a-reset. Package Including: 1 * ESP8266 WiFi Deauther Watch with 3D Printing Case and 500mAh lithium battery (Assembled) 1 * 5db FPC Antenna
2020-06-17 06:03:56