WayinTop 1pcs 0.1-2000MHz RF WideBand Amplifier 30dB High Gain Low Noise LNA Broadband Signal Receiver Radio Amplification + 2pcs 20cm SMA Male to SMA Male RG316 RF Coaxial Coax Cable Adapter Jumper
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
【RF WideBand Amplifier】0.1-2000MHz RF Wide Band Amplifier; Operating frequency0.1-2000MHz.【High Gain 】This product with wide frequency range, high gain, low noise figure.【With RG316 RF Coaxial Cable】This Kit contains 2pcs RG316 Wire Jumper SMA Male to SMA Coaxial Cable, You don’t need to buy it separately, so you can get started immediately.【Widly Applications】This product can be applied to various RF receive front-end and increases communication distance ; be used for Short wave, FM radio, remote control receiver, such as cable TV signal amplifier need low noise rf signal amplification.
상품설명
Specifications: RF WideBand Amplifier: Operating frequency0.1-2000MHz Amplifier gain F=0.1MHz, gain=32dB F=500Mhz, gain=31dB F=1000MHz, gain=29dB F=1500Mhz, gain=25dB F=2000MHz, gain=20dB System impedance: 50 Ohm Maximum power output+10dBm 10mW Power supply voltage: DC 5-12V, Long-term working voltage is recommended less than 10V.. RG316 RF Coaxial Cable: Wire model: RG316 Material: pure copper, silver plated Attenuation per meter: 0.145dB/m Frequency: 0-3GHz Impedance: 50 ohms Wire diameter: 2.5mm Tips: 1.When working frequency is less than 500 MHZit get well gain flatness, can make it less than 1dB after careful adjustment. The lower frequency the higher gain consistency. 2.Amplifier working frequency of the lower limit is subject to input and output capacitor, the default value is 0.1 uF, working to 0.1 MHz. Increase the input and output capacitance appropriately, can extend the cut-off frequency, such as 10uF capacitance can work to 5KHz. 3.When the power supply voltage changes in 5-8 v, it can be used as a variable gain amplifier, gain increases with the increase of the power supply voltage, which suitable for radio frequency receive front-end circuit, using DA control power supply voltage, to control the gain of the amplifier, automatic gain control 4.When the power supply voltage in the 8-10 v, the low frequency end gain up to 30 db, at this time the amplifier has a low noise coefficient and good stability. 5.When the voltage is 12 v, reach maximum gain, the low frequency end gain of 32.5 dB. Package Included: 1 x 0.1-2000MHz RF Wide Band Amplifier Module 30dB High Gain 2 x 20cm SMA Male to SMA Male RF Coaxial Cable
【RF WideBand Amplifier】0.1-2000MHz RF Wide Band Amplifier; Operating frequency0.1-2000MHz.【High Gain 】This product with wide frequency range, high gain, low noise figure.【With RG316 RF Coaxial Cable】This Kit contains 2pcs RG316 Wire Jumper SMA Male to SMA Coaxial Cable, You don’t need to buy it separately, so you can get started immediately.【Widly Applications】This product can be applied to various RF receive front-end and increases communication distance ; be used for Short wave, FM radio, remote control receiver, such as cable TV signal amplifier need low noise rf signal amplification.
상품설명
Specifications: RF WideBand Amplifier: Operating frequency0.1-2000MHz Amplifier gain F=0.1MHz, gain=32dB F=500Mhz, gain=31dB F=1000MHz, gain=29dB F=1500Mhz, gain=25dB F=2000MHz, gain=20dB System impedance: 50 Ohm Maximum power output+10dBm 10mW Power supply voltage: DC 5-12V, Long-term working voltage is recommended less than 10V.. RG316 RF Coaxial Cable: Wire model: RG316 Material: pure copper, silver plated Attenuation per meter: 0.145dB/m Frequency: 0-3GHz Impedance: 50 ohms Wire diameter: 2.5mm Tips: 1.When working frequency is less than 500 MHZit get well gain flatness, can make it less than 1dB after careful adjustment. The lower frequency the higher gain consistency. 2.Amplifier working frequency of the lower limit is subject to input and output capacitor, the default value is 0.1 uF, working to 0.1 MHz. Increase the input and output capacitance appropriately, can extend the cut-off frequency, such as 10uF capacitance can work to 5KHz. 3.When the power supply voltage changes in 5-8 v, it can be used as a variable gain amplifier, gain increases with the increase of the power supply voltage, which suitable for radio frequency receive front-end circuit, using DA control power supply voltage, to control the gain of the amplifier, automatic gain control 4.When the power supply voltage in the 8-10 v, the low frequency end gain up to 30 db, at this time the amplifier has a low noise coefficient and good stability. 5.When the voltage is 12 v, reach maximum gain, the low frequency end gain of 32.5 dB. Package Included: 1 x 0.1-2000MHz RF Wide Band Amplifier Module 30dB High Gain 2 x 20cm SMA Male to SMA Male RF Coaxial Cable
2020-07-22 13:27:40
