Stickers for fuel tank tankpad 3D effect resin adhesive sticker compatible with BM.W BM.W R 1250 GS R1250GS ADV Adventure (White/Blue/Red)
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.3d gel motorcycle cap protector.Helps to protects your fuel tank paint against scratches of jacket zip.Water and fade resistant, not easy to peel off.Strong glue and ultra sticky.Sleek Segmented Design For Better Fit And Better Adhesion.
상품설명
Tank adhesive made entirely of polyurethane resin: excellent quality, clarity, softness and flexibility, resistant to UV radiation. It has no signs of wear and yellowing with time, protecting the tank altogether from scratches and bad weather. The resin coating gives the adhesive an outstanding 3D relief effect that enhances the colors and shades of our models. Application Notes: 1. Use a soft cloth before applying the adhesive and make sure that the surface of the tank is degreased and clean and dry. 2. Apply adhesive tape to the tank before application, so that the adhesive is centered and straight, place it on the tank without fixing it and judging the correct position. 3. Remove the backsheet from the adhesive. 4. Start by applying the adhesive from one side. If air bubbles form, remove them by pressing with your fingers. 5. Finally, remove the transparent film (application tape) that is on the adhesive. 6. Now the work is completed and your bike will be even more beautiful and protected.
Make sure this fits by entering your model number.3d gel motorcycle cap protector.Helps to protects your fuel tank paint against scratches of jacket zip.Water and fade resistant, not easy to peel off.Strong glue and ultra sticky.Sleek Segmented Design For Better Fit And Better Adhesion.
상품설명
Tank adhesive made entirely of polyurethane resin: excellent quality, clarity, softness and flexibility, resistant to UV radiation. It has no signs of wear and yellowing with time, protecting the tank altogether from scratches and bad weather. The resin coating gives the adhesive an outstanding 3D relief effect that enhances the colors and shades of our models. Application Notes: 1. Use a soft cloth before applying the adhesive and make sure that the surface of the tank is degreased and clean and dry. 2. Apply adhesive tape to the tank before application, so that the adhesive is centered and straight, place it on the tank without fixing it and judging the correct position. 3. Remove the backsheet from the adhesive. 4. Start by applying the adhesive from one side. If air bubbles form, remove them by pressing with your fingers. 5. Finally, remove the transparent film (application tape) that is on the adhesive. 6. Now the work is completed and your bike will be even more beautiful and protected.
2020-02-24 15:40:28
