dbx RTA-M Omnidirectional Measurement Condenser Microphone for DriveRack PA Processor Series Bundle with Blucoil 2-Pack of 10-FT Balanced XLR Cables, and 5-Pack of Reusable Cable Ties
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
ACCURATELY ANALYZES YOUR ROOM'S ACOUSTICS - The dbx RTA-M Measurement Microphone helps you calibrate your sound system by analyzing the audio in your studio in real-time. It ensures that you get an accurate "pinking" room.CAPTURES SOUND FROM ALL DIRECTIONS - The omnidirectional mic detects audio source from all sides equally. It doesn't exhibit any pronounced proximity effect you usually experience with a cardioid.HELPS OPTIMIZE THE SOUND QUALITY OF A ROOM - When in use with a DriveRack PA, this microphone picks up all frequencies of 20Hz-20kHz so you get a super accurate acoustic measurement.WORKS WITH DRIVERACK PA SERIES - RTA-M is an accessory reference microphone for dbx DriveRack PA, PX, PA+, PA2, and 260 System. The mic can be used along with Auto EQ and System Setup Wizard.INCLUDES - dbx RTA-M Omnidirectional Measurement Condenser Microphone; Mic Clip; Carry Case. 2-Pack of Blucoil 10-Foot Balanced XLR Cables - Premium Series 3-Pin Cable for Microphones, Speakers, and Pro Devices (Male-to-Female). 5-Pack of Blucoil Reusable Velcro Cable Ties.
상품설명
dbx RTA-M Measurement Microphone The RTA-M Condenser Microphone is a great accessory tool for accurately analyzing the audio in your studio in real-time. It provides a flat frequency response of 20Hz-20kHz and a highly accurate omnidirectional polar pattern. RTA-M makes sure you get an accurate "pinking" room. The mic is compatible with dbx DriveRack PA, PX, PA+, PA2, and 260 Processors. You can use RTA-M together with System Setup and Auto EQ Wizard. TECHNICAL SPECS: Element: Back Electret Condenser Required Phantom Power: 15-48V Polar Pattern: Omnidirectional Frequency Response: 20Hz-20kHz Open Circuit Sensitivity: -63dB +/-3dB Impedance: 250 Ohm +/-30% (at 1kHz) Connector: XLR Operating Voltage: 9-52V DC Phantom Power Dimensions: 0.4" Diameter, 5.7" Length Accessories: Mic Clip, Carry Case Also Comes With: Blucoil 10-FT Balanced XLR Cables (2-Pack) The 10-foot Blucoil cable interconnects your microphone to an audio interface, mixer, or preamp. It is made with premium Male-to-Female Neutrik-equivalent Zinc Alloy connectors that are protected with a high-density PVC jacket. The 92% shielding protects your audio signal from EMI and RFI. The OFC wire ensures that the best possible conductivity is provided. The Blucoil Balanced XLR Cable also avoids unwanted lost signals or degeneration. Get this bundle today and receive 5-Pack of Blucoil Reusable Velcro Cable Ties!
ACCURATELY ANALYZES YOUR ROOM'S ACOUSTICS - The dbx RTA-M Measurement Microphone helps you calibrate your sound system by analyzing the audio in your studio in real-time. It ensures that you get an accurate "pinking" room.CAPTURES SOUND FROM ALL DIRECTIONS - The omnidirectional mic detects audio source from all sides equally. It doesn't exhibit any pronounced proximity effect you usually experience with a cardioid.HELPS OPTIMIZE THE SOUND QUALITY OF A ROOM - When in use with a DriveRack PA, this microphone picks up all frequencies of 20Hz-20kHz so you get a super accurate acoustic measurement.WORKS WITH DRIVERACK PA SERIES - RTA-M is an accessory reference microphone for dbx DriveRack PA, PX, PA+, PA2, and 260 System. The mic can be used along with Auto EQ and System Setup Wizard.INCLUDES - dbx RTA-M Omnidirectional Measurement Condenser Microphone; Mic Clip; Carry Case. 2-Pack of Blucoil 10-Foot Balanced XLR Cables - Premium Series 3-Pin Cable for Microphones, Speakers, and Pro Devices (Male-to-Female). 5-Pack of Blucoil Reusable Velcro Cable Ties.
상품설명
dbx RTA-M Measurement Microphone The RTA-M Condenser Microphone is a great accessory tool for accurately analyzing the audio in your studio in real-time. It provides a flat frequency response of 20Hz-20kHz and a highly accurate omnidirectional polar pattern. RTA-M makes sure you get an accurate "pinking" room. The mic is compatible with dbx DriveRack PA, PX, PA+, PA2, and 260 Processors. You can use RTA-M together with System Setup and Auto EQ Wizard. TECHNICAL SPECS: Element: Back Electret Condenser Required Phantom Power: 15-48V Polar Pattern: Omnidirectional Frequency Response: 20Hz-20kHz Open Circuit Sensitivity: -63dB +/-3dB Impedance: 250 Ohm +/-30% (at 1kHz) Connector: XLR Operating Voltage: 9-52V DC Phantom Power Dimensions: 0.4" Diameter, 5.7" Length Accessories: Mic Clip, Carry Case Also Comes With: Blucoil 10-FT Balanced XLR Cables (2-Pack) The 10-foot Blucoil cable interconnects your microphone to an audio interface, mixer, or preamp. It is made with premium Male-to-Female Neutrik-equivalent Zinc Alloy connectors that are protected with a high-density PVC jacket. The 92% shielding protects your audio signal from EMI and RFI. The OFC wire ensures that the best possible conductivity is provided. The Blucoil Balanced XLR Cable also avoids unwanted lost signals or degeneration. Get this bundle today and receive 5-Pack of Blucoil Reusable Velcro Cable Ties!
2021-11-20 19:14:41