【Upgraded】 SEESII Vector Network Analyzer 10KHz -1.5GHz VNA HF VHF UHF Antenna Analyzer 4.3 inch IPS LCD Touchscreen,5000mAH Battery,Metal Case with RF Demo Kit (V3.1 Version)
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.2020 NEW UPGRADED: Added battery circuit management, more secure. Redesigned PCB, you can connect to mobile phone Via Type C jack, and connect to PC Via Type-C TO USB,see a clear HD image on your phone. Designed a practical and simple control application on PC, you can download touchstone(SNP) files for radio design and simulation software. Added a Metal Case, which reduce the external interference and improve the measurement accuracy.IMPROVED FREQUENCY RANGE: The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency from 10KHz to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics4.3 INCH TOUCH SCREEN AND POWERFUL FUNCTION: This is a practical measuring tool, 4.3-inch IPS TFT LCD and resistive touch screen, The default firmware main function is used for antenna performance measurement,which can measure S-parameter, voltage standing wave ratio SWR, phase map, group delay, Smith chart and so on. Equpped with RF Demo Kit,For NanoVNA RF Test Vector Network Tests Filter/ AttenuatorPOWERFUL BATTERY SUPPLY: This VNA Nanovna-F is battery powered or USB powered; Built in 5000mAh/ 3.7V lithium battery, could work for 8 hours continuously, if need extra working time, it can be used as a mobile power source to charge Android or Apple phones when not in use.WHAT YOU CAN GET: VER 3.1 NanoVNA-Fhost (Push Button Switch Type) x1, SMA-JJ RG316 cable x2, 1 set of calibration parts, Type-C TO USB cable x1 , PCB RF Tester Board x1,20cm Adapter Cable x2,Manual x1,Exquisite box,1 Year Warranty x 24 hours a day service
상품설명
Features: Measuring Frequency: 10kHz ~ 1500MHz RF Tester Board RF Demo Kit Filter Attenuator for NanoVNA-F Vector Anaylzer RF output: - 13 DBM (maximum - 9 dbm) Frequency accuracy: < 0.5 ppm Port SWR: < 1.1 Display: 4.3 inch IPS TFT (800x480) USB Interface: USB Type-C Communication Mode: CDC (Serial) Power consumption: USB 5V 200mA, built-in 5000mAh battery, theoretical life of 18 hours, maximum charging current 2A Number of calibration points: 101 Number of scanning points: 101 Display Tracking: 4, Mark: 4, Settings Save: 5 Measurable S parameters, voltage standing wave ratio SWR, phase diagram, group delay, Smith circle diagram Designing a metal shield for the RF front end, allowing the S21 to have a dynamic range better than 60dB over the full frequency range power bank fuction: 5V/1A , Supporting Android and Apple Mobile NanoVNA-F S11 parameter, SWR standing wave ratio test UV9D antenna U-band standing wave ratio measurement, starting frequency: 300M, termination frequency: 600M, standing wave minimum frequency 441.000000MHz, SWR = 1.03. S21 insertion loss measurement, low pass, high pass, band pass filter measurement Measuring 6.5M Ceramic Notch with NanoVNA-F Measuring 10.7M ceramic filter using NanoVNA-F A self-made low-pass filter was measured using the NanoVNA-F with a 3dB bandwidth of approximately 400MHz. Performance comparison, E5071C four-port vector network vs NanoVNA-F Package list 1x Upgraded NanoVNA-F(Push Button Switch Type) 2x SMA-JJ RG316 cable 1 set of calibration parts 1x SMA-JJ 1x SMA 1x Type-C data cable 1X PCB RF Tester Board 2X 20cm Adapter Cable
Make sure this fits by entering your model number.2020 NEW UPGRADED: Added battery circuit management, more secure. Redesigned PCB, you can connect to mobile phone Via Type C jack, and connect to PC Via Type-C TO USB,see a clear HD image on your phone. Designed a practical and simple control application on PC, you can download touchstone(SNP) files for radio design and simulation software. Added a Metal Case, which reduce the external interference and improve the measurement accuracy.IMPROVED FREQUENCY RANGE: The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency from 10KHz to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics4.3 INCH TOUCH SCREEN AND POWERFUL FUNCTION: This is a practical measuring tool, 4.3-inch IPS TFT LCD and resistive touch screen, The default firmware main function is used for antenna performance measurement,which can measure S-parameter, voltage standing wave ratio SWR, phase map, group delay, Smith chart and so on. Equpped with RF Demo Kit,For NanoVNA RF Test Vector Network Tests Filter/ AttenuatorPOWERFUL BATTERY SUPPLY: This VNA Nanovna-F is battery powered or USB powered; Built in 5000mAh/ 3.7V lithium battery, could work for 8 hours continuously, if need extra working time, it can be used as a mobile power source to charge Android or Apple phones when not in use.WHAT YOU CAN GET: VER 3.1 NanoVNA-Fhost (Push Button Switch Type) x1, SMA-JJ RG316 cable x2, 1 set of calibration parts, Type-C TO USB cable x1 , PCB RF Tester Board x1,20cm Adapter Cable x2,Manual x1,Exquisite box,1 Year Warranty x 24 hours a day service
상품설명
Features: Measuring Frequency: 10kHz ~ 1500MHz RF Tester Board RF Demo Kit Filter Attenuator for NanoVNA-F Vector Anaylzer RF output: - 13 DBM (maximum - 9 dbm) Frequency accuracy: < 0.5 ppm Port SWR: < 1.1 Display: 4.3 inch IPS TFT (800x480) USB Interface: USB Type-C Communication Mode: CDC (Serial) Power consumption: USB 5V 200mA, built-in 5000mAh battery, theoretical life of 18 hours, maximum charging current 2A Number of calibration points: 101 Number of scanning points: 101 Display Tracking: 4, Mark: 4, Settings Save: 5 Measurable S parameters, voltage standing wave ratio SWR, phase diagram, group delay, Smith circle diagram Designing a metal shield for the RF front end, allowing the S21 to have a dynamic range better than 60dB over the full frequency range power bank fuction: 5V/1A , Supporting Android and Apple Mobile NanoVNA-F S11 parameter, SWR standing wave ratio test UV9D antenna U-band standing wave ratio measurement, starting frequency: 300M, termination frequency: 600M, standing wave minimum frequency 441.000000MHz, SWR = 1.03. S21 insertion loss measurement, low pass, high pass, band pass filter measurement Measuring 6.5M Ceramic Notch with NanoVNA-F Measuring 10.7M ceramic filter using NanoVNA-F A self-made low-pass filter was measured using the NanoVNA-F with a 3dB bandwidth of approximately 400MHz. Performance comparison, E5071C four-port vector network vs NanoVNA-F Package list 1x Upgraded NanoVNA-F(Push Button Switch Type) 2x SMA-JJ RG316 cable 1 set of calibration parts 1x SMA-JJ 1x SMA 1x Type-C data cable 1X PCB RF Tester Board 2X 20cm Adapter Cable
2020-09-02 16:29:38