TMCRAFT 64oz Pressurized Mini Keg Growler, Portable Stainless Steel Home Keg Kit System with Updated Co2 Regulator Keeps Fresh and Carbonation for Homebrew, Craft and Draft Beer
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.64OZ CAPACITY: Portable size is easy to transportation and storage. Measures 7.3"L x 5.3"W x 13.4"H & fits standard kegerator cooler/fridgeSTAINLESS STEEL MATERIAL: All accessories including kegs are made of food grade 304 stainless steel which keep beer flavors and freshUPGRADED REGULATOR: Monitor the mini keg growler‘s current PSI from the regulator gauge more accurately and fine tune pressure by rotating the adjustment knob to control the beer flowCO2 CARTRIDGE SYSTEM: Screw CO2 gas cartridges(3/8" Thread)into the regulation supply to maintains perfect carbonation. 16g capsule can tap 128OZ of beer. (CO2 CARTRIDGE NOT INCLUDED)ONE YEAR WARRANTY: Message us 24/7 via Amazon for full support and service if you are not fully satisfied with our mini keg or it does not perform to your expectations
상품설명
COMPONENTS 1. Mini Steel Keg (64oz). 2. Stainless Steel Spear with Pressure Relief Valve. 3. Stainless Steel Stout Faucet. 4. Black Plastic Knob. 5. Black C02 Regulator 6. Thread 3/8" CO2 Cartridge/Capsule (not included). HOW TO ASSEMBLE 1. Manually clean mini-keg, cap, spear body,faucet and beer hose with warm water and mild soap before use. 2. Pour craft beer, draft and homebrew into keg 3.Install faucet into spear body. (We have completed this step for you) 4. Attach hose into spear. 5. Connect the newly assembled tap system to the top of the keg by screwing it on. 6. Turn in a new 16g C02 capsule with thread type of 3/8", turn clockwise firmly into the regulator base. DON'T stop turning if you hear a slight gas leak swish, finish turning it in all the way it seals properly. 7. Connect the regulator to the spear body and check whether the regulator knob is in OFF position. 8. Put a glass or pitcher under the faucet spout, with the faucet knob puller forward(ON),Slowly turn the regulator knob on in clockwise direction, until beer starts to flow out.Suggest tapping 5-8PSI. Note: Once keg is completely empty, pull the pressure relief valve to release the CO2 gas. Once empty, you can remove CO2 cartridge.
Make sure this fits by entering your model number.64OZ CAPACITY: Portable size is easy to transportation and storage. Measures 7.3"L x 5.3"W x 13.4"H & fits standard kegerator cooler/fridgeSTAINLESS STEEL MATERIAL: All accessories including kegs are made of food grade 304 stainless steel which keep beer flavors and freshUPGRADED REGULATOR: Monitor the mini keg growler‘s current PSI from the regulator gauge more accurately and fine tune pressure by rotating the adjustment knob to control the beer flowCO2 CARTRIDGE SYSTEM: Screw CO2 gas cartridges(3/8" Thread)into the regulation supply to maintains perfect carbonation. 16g capsule can tap 128OZ of beer. (CO2 CARTRIDGE NOT INCLUDED)ONE YEAR WARRANTY: Message us 24/7 via Amazon for full support and service if you are not fully satisfied with our mini keg or it does not perform to your expectations
상품설명
COMPONENTS 1. Mini Steel Keg (64oz). 2. Stainless Steel Spear with Pressure Relief Valve. 3. Stainless Steel Stout Faucet. 4. Black Plastic Knob. 5. Black C02 Regulator 6. Thread 3/8" CO2 Cartridge/Capsule (not included). HOW TO ASSEMBLE 1. Manually clean mini-keg, cap, spear body,faucet and beer hose with warm water and mild soap before use. 2. Pour craft beer, draft and homebrew into keg 3.Install faucet into spear body. (We have completed this step for you) 4. Attach hose into spear. 5. Connect the newly assembled tap system to the top of the keg by screwing it on. 6. Turn in a new 16g C02 capsule with thread type of 3/8", turn clockwise firmly into the regulator base. DON'T stop turning if you hear a slight gas leak swish, finish turning it in all the way it seals properly. 7. Connect the regulator to the spear body and check whether the regulator knob is in OFF position. 8. Put a glass or pitcher under the faucet spout, with the faucet knob puller forward(ON),Slowly turn the regulator knob on in clockwise direction, until beer starts to flow out.Suggest tapping 5-8PSI. Note: Once keg is completely empty, pull the pressure relief valve to release the CO2 gas. Once empty, you can remove CO2 cartridge.
2020-07-23 10:37:17