Complete Belt Grinder Knives Wheel Set, 5" Drive 5/8, 4" Tracking, 2" Idler Wheels
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.The 2" wheels are 2" in diameter and 2" wide. They have pressed in sealed radial ball bearings and contoured edges to aid with belt tracking (these wheels are typically used with a flat platen attachment on the belt grinder) There is a spacer between the bearing to help prevent over tightening.The 4" tracking Wheel is 4" diameter and 2.5" wide. It is crowned to help with belt tracking and it also has the spacer between the bearings to prevent over tightening.The inside diameter of all bearings used is 1/2". Make sure the Method you use to mount the wheels (I just use a 1/2 bolt with no washer and a nut on the other side) does not make contact with the inner and outer races on the bearings at the same time causing it to bind.The drive wheel is 5" diameter and 2.25" wide. It is crowned to help with belt tracking.Package: 5" drive Wheel (with 5/8" bore), 4" tracking wheel, and two 2" idler wheels./ If you have any questions, simple return them and got a refund back, or please contact to us anf got an reply wothin 12 hours. With a 180 days warranty, thank you.
상품설명
A complete knife grinder wheel set. Package includes 5" drive Wheel (with 5/8" BORE), 4" tracking wheel, and two 2" idler wheels. The descriptions of the items are as follows. These wheels are made of billet 6061 aluminum. The 2" wheels are 2" in diameter and 2" wide. They have pressed in sealed radial ball bearings and contoured edges to aid with belt tracking (these wheels are typically used with a flat platen attachment on the belt grinder) There is a spacer between the bearing to help prevent over tightening. The 4" tracking Wheel is 4" diameter and 2.5" wide. It is crowned to help with belt tracking and it also has the spacer between the bearings to prevent over tightening. The inside diameter of all bearings used is 1/2". Make sure the Method you use to mount the wheels (I just use a 1/2 bolt with no washer and a nut on the other side) does not make contact with the inner and outer races on the bearings at the same time causing it to bind. The Drive Wheel is 5" diameter and 2.25" wide. It is crowned to help with belt tracking. This drive wheel in this listing is a 5/8" bore with a 3/16 keyway and set screw.
Make sure this fits by entering your model number.The 2" wheels are 2" in diameter and 2" wide. They have pressed in sealed radial ball bearings and contoured edges to aid with belt tracking (these wheels are typically used with a flat platen attachment on the belt grinder) There is a spacer between the bearing to help prevent over tightening.The 4" tracking Wheel is 4" diameter and 2.5" wide. It is crowned to help with belt tracking and it also has the spacer between the bearings to prevent over tightening.The inside diameter of all bearings used is 1/2". Make sure the Method you use to mount the wheels (I just use a 1/2 bolt with no washer and a nut on the other side) does not make contact with the inner and outer races on the bearings at the same time causing it to bind.The drive wheel is 5" diameter and 2.25" wide. It is crowned to help with belt tracking.Package: 5" drive Wheel (with 5/8" bore), 4" tracking wheel, and two 2" idler wheels./ If you have any questions, simple return them and got a refund back, or please contact to us anf got an reply wothin 12 hours. With a 180 days warranty, thank you.
상품설명
A complete knife grinder wheel set. Package includes 5" drive Wheel (with 5/8" BORE), 4" tracking wheel, and two 2" idler wheels. The descriptions of the items are as follows. These wheels are made of billet 6061 aluminum. The 2" wheels are 2" in diameter and 2" wide. They have pressed in sealed radial ball bearings and contoured edges to aid with belt tracking (these wheels are typically used with a flat platen attachment on the belt grinder) There is a spacer between the bearing to help prevent over tightening. The 4" tracking Wheel is 4" diameter and 2.5" wide. It is crowned to help with belt tracking and it also has the spacer between the bearings to prevent over tightening. The inside diameter of all bearings used is 1/2". Make sure the Method you use to mount the wheels (I just use a 1/2 bolt with no washer and a nut on the other side) does not make contact with the inner and outer races on the bearings at the same time causing it to bind. The Drive Wheel is 5" diameter and 2.25" wide. It is crowned to help with belt tracking. This drive wheel in this listing is a 5/8" bore with a 3/16 keyway and set screw.
2020-09-13 21:29:15