SEESII 2020 Vector Network Analyzer 10KHz -3GHz HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart with 1950mAh (S-A-A-2)
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
2020 NEW UPGRADED VERSION:The S-A-A-2/NanoVNA_V2 uses a similar user interface to the NanoVNA, but with a different technical architecture, the S-A-A-2/NanoVNA_V2 does not load the initial calibration data at startup, and does not automatically interpolate the calibration data after the user changes the frequency, and must recalibrate or call back the calibration data after each startup and frequency change. Please read the user manual carefully before use to avoid damaging the device.IMPROVED FREQUENCY RANGE: The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 3GHz. The 50K-1500MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 150M-3000MHz band provides better than 60dB of dynamics, and S11 noise floor (calibrated): -50dB (up to 1.5GHz), -40dB (up to 3GHz)COMPACT & POWERFUL: The default firmware main function is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters. Can be controlled by PC via VNA-QT software,supported for Linux, Windows (7+), Mac OS plannedPOWERFUL BATTERY SUPPLY: This VNA V2 is battery powered or USB powered; Built in 1950mAh battery, could work for 6 hours continuously, if need extra working time, it can be connected to power bank or power source.Package include S-A-A-2 host (with battery) x1, Micro USB data cable x1, 30cm SMA male to male SS405 RF cable x2, SMA male calibration kit - OPEN x1,SMA male calibration kit - SHORT x1,SMA male calibration kit - LOAD x1,SMA female to female connector x1
2020 NEW UPGRADED VERSION:The S-A-A-2/NanoVNA_V2 uses a similar user interface to the NanoVNA, but with a different technical architecture, the S-A-A-2/NanoVNA_V2 does not load the initial calibration data at startup, and does not automatically interpolate the calibration data after the user changes the frequency, and must recalibrate or call back the calibration data after each startup and frequency change. Please read the user manual carefully before use to avoid damaging the device.IMPROVED FREQUENCY RANGE: The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 3GHz. The 50K-1500MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 150M-3000MHz band provides better than 60dB of dynamics, and S11 noise floor (calibrated): -50dB (up to 1.5GHz), -40dB (up to 3GHz)COMPACT & POWERFUL: The default firmware main function is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters. Can be controlled by PC via VNA-QT software,supported for Linux, Windows (7+), Mac OS plannedPOWERFUL BATTERY SUPPLY: This VNA V2 is battery powered or USB powered; Built in 1950mAh battery, could work for 6 hours continuously, if need extra working time, it can be connected to power bank or power source.Package include S-A-A-2 host (with battery) x1, Micro USB data cable x1, 30cm SMA male to male SS405 RF cable x2, SMA male calibration kit - OPEN x1,SMA male calibration kit - SHORT x1,SMA male calibration kit - LOAD x1,SMA female to female connector x1
2020-07-21 16:43:05
