Digital Oscilloscope 2 Channels 110Mhz Bandwidth 1GS/s Sample Rate,Record Length 10K,Trigger Mode,7'' LCD Display Portable USB Oscilloscope (SDS1102X)
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.CDEK SDS1102X is a desktop digital oscilloscope.The weight is remarkably light at 1.1 kg and has a power consumption of only 15W. The 2-channel device with 110 MHz bandwidth, 1 GSa/s sample rate and 10K record length.CDEK SDS1102X has a simplified synchronization system which supports two trigger types: level and edge.The display, while only 800px wide, provides an excellent view at all angles. With regards to speed, it has a fast and instantaneous the response. After selecting and saving an image, the use of its measure function will allow a user to select a channel to get feedback which includes but is not limited to: period, mean, rms, minimum, base, overshoot, duty cycle and more. The CDEK SDS1102X oscilloscope can provide a large amount of information on a signal.There is also a Math-button present that you can use to carry out a number of operations on the input signals. This is also limited with only +, -, x, : and inverting, but these are nevertheless the most important functions. Remarkable is the fact that this scope does have an FFT function with quite a few configuration settings.Communication interface: USB host, USB device.Suitable for electronic circuit debugging, circuit testing, design and manufacturing, education and training, vehicle maintenance and testing.Trigger Mode:Auto, Normal, and Single;Probe Attenuation Multiples of 1X, 10X, 100X, 1000X.
상품설명
Style:SDS1102 CDEK SDS1102X is a desktop digital oscilloscope.Digital Oscilloscope with 2 Channels and Screen 7 inch TFT-LCD Display,110mhz Bandwidth.Portable Professional Oscilloscope Kit with 1GS/s Sampling Rate. Technical specifications Channel: 2 Bandwidth:100MHz Sample Rate:1GS/s Rise Time:≤3.5ns DC Gain Accuracy:±3% Horizontal Scale (s/div):2ns/div - 1000s/div Vertical Resolution (A/D):8 bits (2 channels simultaneously) Input Max Input Voltage :400V Input Coupling :DC, AC , and GND Probe Attenuation Factor :1X, 10X, 100X, 1000X Vertical Sensitivity :5mV/div - 5V/div (at input) Channel Isolation : 50Hz : 100 : 1, 10MHz : 40 : 1 Input Impedance :1MΩ ± 2%, in parallel with 20pF±5pF Trigger System Trigger Type :Edge, Video Trigger Mode :Auto, Normal, and Single Trigger Level:±5 divisions from screen center Video Trigger Record Length :10K Interpolation :sin (x) / x Sample Rate Accuracy :±100ppm Vertical Sensitivity :5mV/div - 5V/div (at input) Measurement and Mathematical Treatment System Cursor Measurement :△V, and △T between cursors Automatic Measurement:Vpp, Vavg, RMS, Frequency, Period, Vmax, Vmin, Vtop, Vbase, Width, Overshoot, Pre-shoot, Rise time, Fall time, +Width, -Width, +Duty, -Duty, Delay A→B , Delay A→B, area,cycle area General Characteristics Fuse :2A, T class, 250V Power Consumption :＜15W Waveform Storage :16 waveforms Device Weight :1.10 kg Dimension :301 x 152 x 70 mm Power Supply :100V - 240V AC, 50/60Hz, CAT II Warning: Before power on again for operation, it is required to confirm that the instrument has already been dried completely, avoiding any electrical short circuit or bodily injury resulting form the moisture.
Make sure this fits by entering your model number.CDEK SDS1102X is a desktop digital oscilloscope.The weight is remarkably light at 1.1 kg and has a power consumption of only 15W. The 2-channel device with 110 MHz bandwidth, 1 GSa/s sample rate and 10K record length.CDEK SDS1102X has a simplified synchronization system which supports two trigger types: level and edge.The display, while only 800px wide, provides an excellent view at all angles. With regards to speed, it has a fast and instantaneous the response. After selecting and saving an image, the use of its measure function will allow a user to select a channel to get feedback which includes but is not limited to: period, mean, rms, minimum, base, overshoot, duty cycle and more. The CDEK SDS1102X oscilloscope can provide a large amount of information on a signal.There is also a Math-button present that you can use to carry out a number of operations on the input signals. This is also limited with only +, -, x, : and inverting, but these are nevertheless the most important functions. Remarkable is the fact that this scope does have an FFT function with quite a few configuration settings.Communication interface: USB host, USB device.Suitable for electronic circuit debugging, circuit testing, design and manufacturing, education and training, vehicle maintenance and testing.Trigger Mode:Auto, Normal, and Single;Probe Attenuation Multiples of 1X, 10X, 100X, 1000X.
상품설명
Style:SDS1102 CDEK SDS1102X is a desktop digital oscilloscope.Digital Oscilloscope with 2 Channels and Screen 7 inch TFT-LCD Display,110mhz Bandwidth.Portable Professional Oscilloscope Kit with 1GS/s Sampling Rate. Technical specifications Channel: 2 Bandwidth:100MHz Sample Rate:1GS/s Rise Time:≤3.5ns DC Gain Accuracy:±3% Horizontal Scale (s/div):2ns/div - 1000s/div Vertical Resolution (A/D):8 bits (2 channels simultaneously) Input Max Input Voltage :400V Input Coupling :DC, AC , and GND Probe Attenuation Factor :1X, 10X, 100X, 1000X Vertical Sensitivity :5mV/div - 5V/div (at input) Channel Isolation : 50Hz : 100 : 1, 10MHz : 40 : 1 Input Impedance :1MΩ ± 2%, in parallel with 20pF±5pF Trigger System Trigger Type :Edge, Video Trigger Mode :Auto, Normal, and Single Trigger Level:±5 divisions from screen center Video Trigger Record Length :10K Interpolation :sin (x) / x Sample Rate Accuracy :±100ppm Vertical Sensitivity :5mV/div - 5V/div (at input) Measurement and Mathematical Treatment System Cursor Measurement :△V, and △T between cursors Automatic Measurement:Vpp, Vavg, RMS, Frequency, Period, Vmax, Vmin, Vtop, Vbase, Width, Overshoot, Pre-shoot, Rise time, Fall time, +Width, -Width, +Duty, -Duty, Delay A→B , Delay A→B, area,cycle area General Characteristics Fuse :2A, T class, 250V Power Consumption :＜15W Waveform Storage :16 waveforms Device Weight :1.10 kg Dimension :301 x 152 x 70 mm Power Supply :100V - 240V AC, 50/60Hz, CAT II Warning: Before power on again for operation, it is required to confirm that the instrument has already been dried completely, avoiding any electrical short circuit or bodily injury resulting form the moisture.
2020-08-12 05:25:35
