Parts & Accessories 433Mhz/915Mhz 500mW/100mW Transceiver Radio FPV Telemetry Set V3 for PIXHawk 4 Flight Controller 117 dBm w/Antenna for RC Drone - (Color: 433Mhz 100mW, CN)
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.1.100 mW / 500mW maximum output power (adjustable) -117 dBm receive sensitivity.2.Open-source SIK firmware.3.RP-SMA connector.4.2-way full-duplex communication through adaptive TDM UART interface.
상품설명
433Mhz/915Mhz 500mW/100mW Transceiver Radio FPV Telemetry Set V3 for PIXHawk 4 Flight Controller 117 dBm w/Antenna For RC Drone Features: 1.100 mW / 500mW maximum output power (adjustable) -117 dBm receive sensitivity. 2.Open-source SIK firmware. 3.RP-SMA connector. 4.2-way full-duplex communication through adaptive TDM UART interface. 5.Transparent serial link. 4.MAVLink protocol framing. 7.Frequency Hopping Spread Spectrum (FHSS) Configurable duty cycle. 8.Error correction corrects up to 25% of bit errors Open-source SIK firmware. 9.Configurable through Mission Planner & APM Planner,FT230X is a USB to BASIC UART IC. Descriptions: 1.It is a small, light and inexpensive open source radio platform that typically allows ranges of better than 300m "out of the box"(the range can be extended to several kilometers with the use of a patch antenna on the ground). 2.The radio uses open source firmware which has been specially designed to work well with MAVLink packets and to be integrated with the Mission Planner, Copter,Rover, and Plane. Specifications: Version: 433Mhz / 915Mhz (Optional) Item Name: 500mW Transceiver Radio Telemetry Set V3 / 100mW Transceiver Radio Telemetry Set V3 (Optional) Applications: Compatible for Pixhawk 4 Flight Controller Size: 26 x 53 x 10.7mm (without antenna) Weight: 27g Power Supply Voltage: 5VDC (from USB or JST-GH) Transmit Current: 500 mA at 27dBm /100 mA at 20dBm (Optional ) Receive current: 25 mA Serial interface: 3.3 V UART Status LEDs The radios have 2 status LEDs, one red and one green. The meaning of the different LED states is: Green LED blinking - searching for another radio Green LED solid - link is established with another radio Red LED flashing - transmitting data Red LED solid - in firmware update mode Connecting to Pixhawk4 Use the 4
Make sure this fits by entering your model number.1.100 mW / 500mW maximum output power (adjustable) -117 dBm receive sensitivity.2.Open-source SIK firmware.3.RP-SMA connector.4.2-way full-duplex communication through adaptive TDM UART interface.
상품설명
433Mhz/915Mhz 500mW/100mW Transceiver Radio FPV Telemetry Set V3 for PIXHawk 4 Flight Controller 117 dBm w/Antenna For RC Drone Features: 1.100 mW / 500mW maximum output power (adjustable) -117 dBm receive sensitivity. 2.Open-source SIK firmware. 3.RP-SMA connector. 4.2-way full-duplex communication through adaptive TDM UART interface. 5.Transparent serial link. 4.MAVLink protocol framing. 7.Frequency Hopping Spread Spectrum (FHSS) Configurable duty cycle. 8.Error correction corrects up to 25% of bit errors Open-source SIK firmware. 9.Configurable through Mission Planner & APM Planner,FT230X is a USB to BASIC UART IC. Descriptions: 1.It is a small, light and inexpensive open source radio platform that typically allows ranges of better than 300m "out of the box"(the range can be extended to several kilometers with the use of a patch antenna on the ground). 2.The radio uses open source firmware which has been specially designed to work well with MAVLink packets and to be integrated with the Mission Planner, Copter,Rover, and Plane. Specifications: Version: 433Mhz / 915Mhz (Optional) Item Name: 500mW Transceiver Radio Telemetry Set V3 / 100mW Transceiver Radio Telemetry Set V3 (Optional) Applications: Compatible for Pixhawk 4 Flight Controller Size: 26 x 53 x 10.7mm (without antenna) Weight: 27g Power Supply Voltage: 5VDC (from USB or JST-GH) Transmit Current: 500 mA at 27dBm /100 mA at 20dBm (Optional ) Receive current: 25 mA Serial interface: 3.3 V UART Status LEDs The radios have 2 status LEDs, one red and one green. The meaning of the different LED states is: Green LED blinking - searching for another radio Green LED solid - link is established with another radio Red LED flashing - transmitting data Red LED solid - in firmware update mode Connecting to Pixhawk4 Use the 4
2022-04-15 23:40:39
