QWORK Twin Blade Adjustable Hole Saw Cutter with ABS Dust Shield for Recessed Lights Speakers Cornhole Boards Cuts Plywood Sheetrock Plaster Fiberglass Plastic, 1-5/8" to 11-13/16" (40-300mm)
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.Professional Cutting - Hole saw cuts smooth and even 8" diameter holes through wood, drywall, plaster and plastic; Cutting depth up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides.Safe & Clean - Ball bearing mounted ABS dust shield with soft silicon rubber gasket to trap the dust and shavings to prevent them from going airborne and making mess in your furnished home. It is also safe to use as protection equipment for hole cutting application.Easy to Use - Includes everything you need to do-it-yourself, mandrel and drill bit work with any 3/8" drills & up.Complete Set - This kit includes one professional grade adjustable hole cutter with two replaceable pilot drill bits (1x auger type Self-Feed pilot bit + 1x HSS pilot bit), two sets of replaceable cutting blades (1 set of high speed steel blades + 1 set of tungsten carbide blades), one ABS dust shield, one adjustment hex wrench, 5 Pcs brad-point wood drill bits and 5 Pcs Masonry drill bits 5/32", 3/16", 1/4", 5/16, 3/8", one 2m tape measure, a durable storage case and user's manual.Convenient & Save Money - One hole cutter kit replaces of dozens of hole saws for faster, safer, easier cutting of exactly the hole size needed. It is a very practical tool set for carpenters, home decorators, contractors, professionals and DIY home owners for recessed lights, ceiling speakers, vent holes and other hole cutting application.
상품설명
Color:1-5/8" to 11-3/16" (40-300mm) Adjustable hole cutter kit Cutting hole diameter: 1-5/8" to 11-13/16" (40mm - 300mm) Cutting depth: up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides Shank: 3-flat shank Infinite adjustment and measure bar is marked in inches and metric system Used for recessed lights and ceiling speakers installation hole cutting, skylights, vent holes cutting Application materials: Sheetrock, Drywall, Plaster, Ceiling Tile, Soft Acoustic Tile, Plastics, Fiberglass, Acrylic Sheet, Soft Wood and Plywood User Instruction It requires a hand drill with a 3/8"(10mm) or larger chuck to cut holes from 1-5/8"(40mm) to 8"(200mm) in diameter and materials up to 3/4"(19mm) thick from one side, 1-1/8"(30mm) thick from two sides Caution * When cutting into walls, floors or ceilings, always check to ensure that no electric cables or water pipes etc are in the vicinity of the proposed cut * Always keep the cutting blades sharp * Do not use undue force, or too great a drill speed, suggested cutting speeds Hole Diameter(mm) Drill Speed(RPM) 40 - 49 --------------- 800 50 - 69 --------------- 600 70 - 89 --------------- 400 90 - 119 -------------- 200 120 -180 -------------- 100 * Ensure the cutting blade holders are tight before use * Make sure to measure the CUTOUT for the product (speaker, recessed light) you are installing. The size of the product you are installing uses a larger cutout, and the needed size is different by manufacturer of the canned light or the speaker * Screw the wing nut on to the threaded end of the spindle so that that assembly is secure * As with any new tool, always test on a scrap piece of material to get familiar with the tool
Make sure this fits by entering your model number.Professional Cutting - Hole saw cuts smooth and even 8" diameter holes through wood, drywall, plaster and plastic; Cutting depth up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides.Safe & Clean - Ball bearing mounted ABS dust shield with soft silicon rubber gasket to trap the dust and shavings to prevent them from going airborne and making mess in your furnished home. It is also safe to use as protection equipment for hole cutting application.Easy to Use - Includes everything you need to do-it-yourself, mandrel and drill bit work with any 3/8" drills & up.Complete Set - This kit includes one professional grade adjustable hole cutter with two replaceable pilot drill bits (1x auger type Self-Feed pilot bit + 1x HSS pilot bit), two sets of replaceable cutting blades (1 set of high speed steel blades + 1 set of tungsten carbide blades), one ABS dust shield, one adjustment hex wrench, 5 Pcs brad-point wood drill bits and 5 Pcs Masonry drill bits 5/32", 3/16", 1/4", 5/16, 3/8", one 2m tape measure, a durable storage case and user's manual.Convenient & Save Money - One hole cutter kit replaces of dozens of hole saws for faster, safer, easier cutting of exactly the hole size needed. It is a very practical tool set for carpenters, home decorators, contractors, professionals and DIY home owners for recessed lights, ceiling speakers, vent holes and other hole cutting application.
상품설명
Color:1-5/8" to 11-3/16" (40-300mm) Adjustable hole cutter kit Cutting hole diameter: 1-5/8" to 11-13/16" (40mm - 300mm) Cutting depth: up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides Shank: 3-flat shank Infinite adjustment and measure bar is marked in inches and metric system Used for recessed lights and ceiling speakers installation hole cutting, skylights, vent holes cutting Application materials: Sheetrock, Drywall, Plaster, Ceiling Tile, Soft Acoustic Tile, Plastics, Fiberglass, Acrylic Sheet, Soft Wood and Plywood User Instruction It requires a hand drill with a 3/8"(10mm) or larger chuck to cut holes from 1-5/8"(40mm) to 8"(200mm) in diameter and materials up to 3/4"(19mm) thick from one side, 1-1/8"(30mm) thick from two sides Caution * When cutting into walls, floors or ceilings, always check to ensure that no electric cables or water pipes etc are in the vicinity of the proposed cut * Always keep the cutting blades sharp * Do not use undue force, or too great a drill speed, suggested cutting speeds Hole Diameter(mm) Drill Speed(RPM) 40 - 49 --------------- 800 50 - 69 --------------- 600 70 - 89 --------------- 400 90 - 119 -------------- 200 120 -180 -------------- 100 * Ensure the cutting blade holders are tight before use * Make sure to measure the CUTOUT for the product (speaker, recessed light) you are installing. The size of the product you are installing uses a larger cutout, and the needed size is different by manufacturer of the canned light or the speaker * Screw the wing nut on to the threaded end of the spindle so that that assembly is secure * As with any new tool, always test on a scrap piece of material to get familiar with the tool
2021-01-05 18:41:35