Raimondi Box Device to Perform 45 Degree Cut without Rail TCLF45DB
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.Perform 45° miter cut high quality finishing (“jolly”) directly on construction site (actual miter angle: 47°)
상품설명
Anti-scratch plastic slides ensure optimal smoothness on the slab/tile. Rides on the edge of the tile (or slab): this guarantees a fast and precise work execution and allows to work without any limit on length. Maximum slab/tile thickness: 16 mm (0.63”) with Ø115 mm (4 1/2”) blade; 20 mm (0.79”) with Ø125 mm (5”) blade. two handles are designed to easily allow the necessary pressure during the entire length of the miter cut (entrance, slab side, exit) to guarantee both optimal results and maximum ergonomics. Cutting depth adjustment made by adjusting knobs, dial in the amount of material to be removed (farther or closer to tile glaze). Once the adjustment is set, it stays for any tiles/slabs thicknesses. Blade tilt adjustment by dedicated screw, blade can be tilted to prevent its rear chip-ping the edge of tiles/slabs. Suitable with almost all angle grinders with power between 600-1100 W. Grinder with ⅝”-11 arbor attachment. Maximum tile thickness of ⅝" (16mm). Use with 4-½" blade. Use dry (with a dust extractor) or with wet (with kit for wet cut art.433PWW A). Angle grinder and diamond tools are not included.
Make sure this fits by entering your model number.Perform 45° miter cut high quality finishing (“jolly”) directly on construction site (actual miter angle: 47°)
상품설명
Anti-scratch plastic slides ensure optimal smoothness on the slab/tile. Rides on the edge of the tile (or slab): this guarantees a fast and precise work execution and allows to work without any limit on length. Maximum slab/tile thickness: 16 mm (0.63”) with Ø115 mm (4 1/2”) blade; 20 mm (0.79”) with Ø125 mm (5”) blade. two handles are designed to easily allow the necessary pressure during the entire length of the miter cut (entrance, slab side, exit) to guarantee both optimal results and maximum ergonomics. Cutting depth adjustment made by adjusting knobs, dial in the amount of material to be removed (farther or closer to tile glaze). Once the adjustment is set, it stays for any tiles/slabs thicknesses. Blade tilt adjustment by dedicated screw, blade can be tilted to prevent its rear chip-ping the edge of tiles/slabs. Suitable with almost all angle grinders with power between 600-1100 W. Grinder with ⅝”-11 arbor attachment. Maximum tile thickness of ⅝" (16mm). Use with 4-½" blade. Use dry (with a dust extractor) or with wet (with kit for wet cut art.433PWW A). Angle grinder and diamond tools are not included.
2021-06-16 11:34:00