DEF 830472P002 RV Awning Arm Slider Catch Kit Compatible with Dometic A&E 8500 9000 (2 Slider Catch)
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.Fitment: Awnings for RVs and Campers include A&E 8500 Awnings A&E 9000 Awnings.Material: Made of high quality plastic with sturdy construction. Compared with metal material, It has less friction with the awning arms.Function: Support and stabilize the awning and keep the roof tensioned when opening.Installation: Insert the new Slider Catch through the hole in the main arm from the front. Place the spring between the back of the slider catch and the Main Arm Snap the back of the slider into the front piece.Include: 2 x slider catches, 2 x springs.
상품설명
Fitment: A&E 8500 Awnings A&E 9000 Awnings Installation: 1.Remove the old slider catch Extend the awning and insert a small flat bladed screwdriver into the seam between the back and front of the catch. Pry the back off and remove the slider catch. 2.Install the new slider catch Insert the new Slider Catch through the hole in the main arm from the front. Then insert the lip of the back into the lower ledge Place the spring between the back of the slider catch and the Main Arm Snap the back of the slider into the front piece being careful not to allow the spring to come out.
Make sure this fits by entering your model number.Fitment: Awnings for RVs and Campers include A&E 8500 Awnings A&E 9000 Awnings.Material: Made of high quality plastic with sturdy construction. Compared with metal material, It has less friction with the awning arms.Function: Support and stabilize the awning and keep the roof tensioned when opening.Installation: Insert the new Slider Catch through the hole in the main arm from the front. Place the spring between the back of the slider catch and the Main Arm Snap the back of the slider into the front piece.Include: 2 x slider catches, 2 x springs.
상품설명
Fitment: A&E 8500 Awnings A&E 9000 Awnings Installation: 1.Remove the old slider catch Extend the awning and insert a small flat bladed screwdriver into the seam between the back and front of the catch. Pry the back off and remove the slider catch. 2.Install the new slider catch Insert the new Slider Catch through the hole in the main arm from the front. Then insert the lip of the back into the lower ledge Place the spring between the back of the slider catch and the Main Arm Snap the back of the slider into the front piece being careful not to allow the spring to come out.
2022-05-17 14:56:17