ElecGear M.2 2280 SSD Heatsink, EL-80P Heat Pipe + Double Deck Solid Aluminum Heat Sink Cooler for 80mm PCIe NVMe and SATA NGFF M2 SSD Internal Solid State Drive Memory, Thermal Pads Included
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Make sure this fits by entering your model number.[Double Heatsink] – The SSD cooler features two layers of aluminum heatsink decks linked by 4 high-end 4mm heat pipes. The heat produced by M.2 2280 SSD will be absorbed by the heatpipe and effectively conducted to both the upper and bottom heatsink. 12 to 25 degrees Celsius drop is expected. NVMe and SATA M.2 SSD are supported. Suitable for PCIE 4.0 Gen4 NVMe[High-end Heat Pipe] – The cooler boasts 4x4mm heatpipe seamlessly embedded in the two layers of solid aluminum heatsink. Passive design with no cooling fan is for being totally silent. The heatsink is the ultimate cooling solution to heat management of 2280 SSD[Thermal Pads] – 2 pieces of thermal pads for excellent heat dissipation. High performance at 4.8W/m-k. The pre-divided small pads are supposed to paste onto the main control IC and memory chips, while the big single-sided pad is to apply to the U-shaped middle frame facing against the bottom of the SSD[Compatibility Note] – The cooler fits NVMe and SATA SSD in 80mm M.2 form factor alone. The memory can be single-sided or double-sided. Please make sure your desktop PC has enough space to house this kit: Minimum width is at least 25.5-mm / 1.01-inch, and 26-mm / 1.03-inch height above the SSD[What’s in Package] – 1*ElecGear EL-80P SSD Heatsink, 10*Small Thermal Pads for IC Chips (Pre-divided Blue), 1*Thermal Pad for SSD back side (Single-sided Grey), Screws and Screwdriver
상품설명
✔ 2x Layers of Aluminum Heatsink Decks ✔ 4x High Performance 4mm Heat Pipes ✔ 2x High-end Silicon Thermal Pads ✔ Fits M.2 SSD in 2280 form factor ✔ Ready for PCIE 4.0 Gen4 NVMe ✔ Product Size: 89Lx25.5Wx28.5H mm ✔ Product Weight: 120g [Compatibility Note] 1.Fits NVMe and SATA SSD in 80mm M.2 form factor alone. 2230, 2242 and 2260 are not supported. 2.The memory can be single-sided or double-sided. 3.Please make sure your desktop PC has enough space to accommodate the kit: Minimum width is more than 25.5-mm / 1.01-inch Minimum height is more than 26-mm / 1.03-inch above the SSD [Packaging] 1x ElecGear EL-80P SSD Heatsink 10x Thermal Pads for Memory Chips (Pre-divided Blue) 1x Thermal Pad for SSD Back Side (Single-sided Grey) 1x PH00 Screwdriver 1x Screw Set
Make sure this fits by entering your model number.[Double Heatsink] – The SSD cooler features two layers of aluminum heatsink decks linked by 4 high-end 4mm heat pipes. The heat produced by M.2 2280 SSD will be absorbed by the heatpipe and effectively conducted to both the upper and bottom heatsink. 12 to 25 degrees Celsius drop is expected. NVMe and SATA M.2 SSD are supported. Suitable for PCIE 4.0 Gen4 NVMe[High-end Heat Pipe] – The cooler boasts 4x4mm heatpipe seamlessly embedded in the two layers of solid aluminum heatsink. Passive design with no cooling fan is for being totally silent. The heatsink is the ultimate cooling solution to heat management of 2280 SSD[Thermal Pads] – 2 pieces of thermal pads for excellent heat dissipation. High performance at 4.8W/m-k. The pre-divided small pads are supposed to paste onto the main control IC and memory chips, while the big single-sided pad is to apply to the U-shaped middle frame facing against the bottom of the SSD[Compatibility Note] – The cooler fits NVMe and SATA SSD in 80mm M.2 form factor alone. The memory can be single-sided or double-sided. Please make sure your desktop PC has enough space to house this kit: Minimum width is at least 25.5-mm / 1.01-inch, and 26-mm / 1.03-inch height above the SSD[What’s in Package] – 1*ElecGear EL-80P SSD Heatsink, 10*Small Thermal Pads for IC Chips (Pre-divided Blue), 1*Thermal Pad for SSD back side (Single-sided Grey), Screws and Screwdriver
상품설명
✔ 2x Layers of Aluminum Heatsink Decks ✔ 4x High Performance 4mm Heat Pipes ✔ 2x High-end Silicon Thermal Pads ✔ Fits M.2 SSD in 2280 form factor ✔ Ready for PCIE 4.0 Gen4 NVMe ✔ Product Size: 89Lx25.5Wx28.5H mm ✔ Product Weight: 120g [Compatibility Note] 1.Fits NVMe and SATA SSD in 80mm M.2 form factor alone. 2230, 2242 and 2260 are not supported. 2.The memory can be single-sided or double-sided. 3.Please make sure your desktop PC has enough space to accommodate the kit: Minimum width is more than 25.5-mm / 1.01-inch Minimum height is more than 26-mm / 1.03-inch above the SSD [Packaging] 1x ElecGear EL-80P SSD Heatsink 10x Thermal Pads for Memory Chips (Pre-divided Blue) 1x Thermal Pad for SSD Back Side (Single-sided Grey) 1x PH00 Screwdriver 1x Screw Set
2022-04-17 23:49:44
