HiFiGo TRI TK2 Portable Fully Balanced DACs, ADC Turbo Volume Technology Headphone Amplifier
|
|
상품가격 상세보기
이벤트보기
|
- 상품상세정보
상품특징
Dual 9038Q2M DACs Chip: Two decoders are respectively responsible for the left and the right channels, to improve dynamics and separation. The internal MCLK uses 45.1584M and 49.152M. The DAC clock synchronization rate is high so that the jitter is reduced, and the resolution is improved.AMP Audio Circuitry: Real full-balanced amplification design, with sufficient driving force and delicate sound. Texas instruments dual OPA2132+ dual TPA6120A2( Class AB Amplification).ADC Turbo Volume Technology: When the potentiometer is rotated, there is no noise and no channel deviation occurs at a low volume. The high gain output is automatically turned on after the knob volume is 60%. Adapt to various earphones having low and high impedance and sensitivity, effectively avoid output excessive and insufficient.Charging and battery life/Endurance: Intelligent charging management: Support charging while working. Dual independent USB Type-C ports will not take power from the phone when connected to the phone.Compatibility and support: USB cable can connect/ is available to Android phones and players that support OTG iPhone/Apple computer Driver-free support Win10 system( Win7 requires driver installation).
상품설명
Parameters: The highest supported format: hard decode 384kHz 32bit/DSD252(Natitve) Decoding: Dual ESS 9038Q2M Output amplification type: Class A and B(ClassAB) THD+N: 0.005% (1K, dsd128) Frequency response: 10-40khz ( <1db) Output power up to : 1250mw (32OΩ) Impedance: 8-600Ω Headphone interface support: 3.5mm single/4.4mm bal/2.5mm bal Fixed LO: 2v Endurance time: about 9 hours (battery 5000mah) Char interface: TYPE-C supports QC3.0 or PD fast char (can be used while char) Decoding interface: TYPE-C(OTG cable is required to connect to mobile phone) Size: about 13cm*6.8cm 2.4cm Weight: about 280g
Dual 9038Q2M DACs Chip: Two decoders are respectively responsible for the left and the right channels, to improve dynamics and separation. The internal MCLK uses 45.1584M and 49.152M. The DAC clock synchronization rate is high so that the jitter is reduced, and the resolution is improved.AMP Audio Circuitry: Real full-balanced amplification design, with sufficient driving force and delicate sound. Texas instruments dual OPA2132+ dual TPA6120A2( Class AB Amplification).ADC Turbo Volume Technology: When the potentiometer is rotated, there is no noise and no channel deviation occurs at a low volume. The high gain output is automatically turned on after the knob volume is 60%. Adapt to various earphones having low and high impedance and sensitivity, effectively avoid output excessive and insufficient.Charging and battery life/Endurance: Intelligent charging management: Support charging while working. Dual independent USB Type-C ports will not take power from the phone when connected to the phone.Compatibility and support: USB cable can connect/ is available to Android phones and players that support OTG iPhone/Apple computer Driver-free support Win10 system( Win7 requires driver installation).
상품설명
Parameters: The highest supported format: hard decode 384kHz 32bit/DSD252(Natitve) Decoding: Dual ESS 9038Q2M Output amplification type: Class A and B(ClassAB) THD+N: 0.005% (1K, dsd128) Frequency response: 10-40khz ( <1db) Output power up to : 1250mw (32OΩ) Impedance: 8-600Ω Headphone interface support: 3.5mm single/4.4mm bal/2.5mm bal Fixed LO: 2v Endurance time: about 9 hours (battery 5000mah) Char interface: TYPE-C supports QC3.0 or PD fast char (can be used while char) Decoding interface: TYPE-C(OTG cable is required to connect to mobile phone) Size: about 13cm*6.8cm 2.4cm Weight: about 280g
2021-11-19 23:51:57
