Aupoko 13.7" Universal Thermocouple Patio Heater Parts, 350 mm Outdoor Heater Replacement Parts with 4.8mm Flat Terminal & M8 x 1 End Connection Nuts, Flame Failure Protection for Most Patio Heaters
아우포코 13.7인치 범용 열전대 파티오 히터 부품, 4.8mm 플랫 단자 및 M8 x 1 엔드 연결 너트가 있는 350mm 실외 히터 교체 부품, 대부분의 파티오 히터에 대한 화재 방지 기능
| 상품번호 | B07M7WRH59 |
| 상태 | New |
| 브랜드 | Aupoko |
| 판매자 | Aupoko |
| 출고국 | 미국 (US) |
아마존 판매가
$7.19
약 10,598원
구매대행 예상 비용은 로그인 후 확인하실 수 있습니다.
상품 특징
Application: This 350 mm thermcouple is suitable for patio heater. This 13.8” outdoor patio heater thermocouple is designed to replace a malfunctioning thermocouple in most propane-powered outdoor patio heaters.
Dimensions: Universal thermocouple 13.7 inch (350 mm) overall length, 4.8 mm flat terminal for connection to dump switch, M8*1 nut to secure valve.
High Quality: This patio heater flame sensor is made of high standard solid copper and brass material with high temperature resistant protective cover. 100% pre-tested voltage and resistance (output >25mV), reliable performance for long term use.
Flame Out Safety Protection: The gas thermocouple wire serves as an important safety device. When the pilot flame is extinguished (valve closure time less than 10 seconds) the gas valve is automatically closed, preventing gas leakage and ensuring safe operation in outdoor spaces such as terraces, gardens or balconies.
Easy Installation Without Complicated Tools: simply attach the thermocouple head to the pilot bracket or mounting plate with a clamp so that the tip is 5 mm (at the right height) from the burner hole, tighten the M8 nut to the gas valve and connect the terminal to the tilt switch. Open the valve for 5-10 seconds to heat the burner, then release. Correctly installed and ready to work immediately.
Dimensions: Universal thermocouple 13.7 inch (350 mm) overall length, 4.8 mm flat terminal for connection to dump switch, M8*1 nut to secure valve.
High Quality: This patio heater flame sensor is made of high standard solid copper and brass material with high temperature resistant protective cover. 100% pre-tested voltage and resistance (output >25mV), reliable performance for long term use.
Flame Out Safety Protection: The gas thermocouple wire serves as an important safety device. When the pilot flame is extinguished (valve closure time less than 10 seconds) the gas valve is automatically closed, preventing gas leakage and ensuring safe operation in outdoor spaces such as terraces, gardens or balconies.
Easy Installation Without Complicated Tools: simply attach the thermocouple head to the pilot bracket or mounting plate with a clamp so that the tip is 5 mm (at the right height) from the burner hole, tighten the M8 nut to the gas valve and connect the terminal to the tilt switch. Open the valve for 5-10 seconds to heat the burner, then release. Correctly installed and ready to work immediately.