TARAMPS VTS5.1 Automotive Digital Voltmeter and Sequencer VTS 5.1 Blue LED Automotive Car Audio 5 Sequencer Outputs SPL Mode Voltage Protection, Digital Display, Car Audio Monitor, Black
TARAMPS VTS5.1 자동차 디지털 전압계 및 시퀀서 VTS 5.1 블루 LED 자동차 오디오 5 시퀀서 출력 SPL 모드 전압 보호, 디지털 디스플레이, 자동차 오디오 모니터, 블랙
| 상품번호 | B0BGSV38V2 |
| 상태 | New |
| 브랜드 | Taramp's |
| 판매자 | Learn more about the seller |
| 출고국 | 미국 (US) |
아마존 판매가
$19.97
약 29,436원
구매대행 예상 비용은 로그인 후 확인하실 수 있습니다.
상품 특징
All functions are accessed by pressing the FCN key, sequentially.
The activation of mixers and/or audio processors should preferably be done at the S1 output for a correct sequential activation (when switching on, from S1 to S5 and when switching off, from S5 to S1), thus avoiding unwanted transients when switching on the amplifier (popularly known as "pop").
IMPORTANT: Outputs S1 to S5 are intended only for activating (REMOTE input) of the sound equipment.
Voltage Check: With the VTS 5.1 without the remote signal it is possible to check the voltage of the batteries, press FCN and the voltage will be displayed and whenever you want to turn off the display press FCN again.
Function SPL:Press FCN for about 10 seconds until “SPL” and “On” appear. This function increases the overvoltage protection (default = 16.5V) to about 19.5V. To deactivate this function, press FCN again for 10 seconds, until “SPL”and “OFF”appear on the display.
The activation of mixers and/or audio processors should preferably be done at the S1 output for a correct sequential activation (when switching on, from S1 to S5 and when switching off, from S5 to S1), thus avoiding unwanted transients when switching on the amplifier (popularly known as "pop").
IMPORTANT: Outputs S1 to S5 are intended only for activating (REMOTE input) of the sound equipment.
Voltage Check: With the VTS 5.1 without the remote signal it is possible to check the voltage of the batteries, press FCN and the voltage will be displayed and whenever you want to turn off the display press FCN again.
Function SPL:Press FCN for about 10 seconds until “SPL” and “On” appear. This function increases the overvoltage protection (default = 16.5V) to about 19.5V. To deactivate this function, press FCN again for 10 seconds, until “SPL”and “OFF”appear on the display.