2" Spa Hot Tub Heater Split Nut Unions with Screw and Heater Gasket, White Spa Heater Split Nut Replacement for Balboa Gecko (Actual Size 3 Inch, Split Nut for 2 Inch Heater Assemblies) - 2 Pcs
2인치 스파 핫텁 히터 스플릿 너트 유니온 나사 및 히터 가스켓 포함, Balboa Gecko용 화이트 스파 히터 스플릿 너트 교체품 (실제 크기 3인치, 2인치 히터 어셈블리용 스플릿 너트) - 2개입
| 상품번호 | B0C9SRR2B1 |
| 상태 | New |
| 브랜드 | UASAM |
| 판매자 | CaidenG |
| 출고국 | 미국 (US) |
아마존 판매가
$13.88
약 20,459원
구매대행 예상 비용은 로그인 후 확인하실 수 있습니다.
상품 특징
【Spa Hot Tub Heater Split Nut Union】This product includes a 2-inch split nut for hot tubs, screws, and a silicone gasket for use with a 2" bathtub heater union.
【Hot Tub Parts】2 inch union is used in hot tubs to do an emergency pump union repair instead of replacing the pump union and all other glued in parts.
【Size and Specifications 】 The Pump Union Split Nut that measures about 3 3/8" on the outside and mounts to the existing Pump Union Body using 2 screws to hold it in place. This Split Nut measures about 2 3/4" ID and mounts on the old Pump Union holding flange and screws onto the pump threads with a gasket between the union and pump. If your pump union plumbing is 1 1/2" or 2" and your pump Threads are 2" (Meaning the Threaded Part measures about 3" Across) this part is correct.
【Wide Application】Spa Heater Split Nut Replacement for Balboa、Gecko , 2" MBT - Buttress thread is the style thread found on most common pumps.
【Easy to install】To install this split nut union you will have to remove the old broken pump union flange nut. This nut can be cut off with a hack saw blade or some cutting pliers if the nut is split enough. Be careful not to cut the pump union glued body when cutting the nut off because you will reuse the split nut union.
【Hot Tub Parts】2 inch union is used in hot tubs to do an emergency pump union repair instead of replacing the pump union and all other glued in parts.
【Size and Specifications 】 The Pump Union Split Nut that measures about 3 3/8" on the outside and mounts to the existing Pump Union Body using 2 screws to hold it in place. This Split Nut measures about 2 3/4" ID and mounts on the old Pump Union holding flange and screws onto the pump threads with a gasket between the union and pump. If your pump union plumbing is 1 1/2" or 2" and your pump Threads are 2" (Meaning the Threaded Part measures about 3" Across) this part is correct.
【Wide Application】Spa Heater Split Nut Replacement for Balboa、Gecko , 2" MBT - Buttress thread is the style thread found on most common pumps.
【Easy to install】To install this split nut union you will have to remove the old broken pump union flange nut. This nut can be cut off with a hack saw blade or some cutting pliers if the nut is split enough. Be careful not to cut the pump union glued body when cutting the nut off because you will reuse the split nut union.