Jumper Cables Compatible with Milwaukee M18 Battery, 2FT 8AWG Portable Battery Jumper Starter Automotive Booster Cables Power for Car Jump Starting Using Tool
Milwaukee M18 배터리 호환 점퍼 케이블, 자동차 점프 스타트용 2FT 8AWG 휴대용 배터리 점퍼 스타터 자동차 부스터 케이블 전원 도구
| 상품번호 | B0FHVTBT1P |
| 상태 | New |
| 브랜드 | GragicSZ |
| 판매자 | zfaying |
| 출고국 | 미국 (US) |
아마존 판매가
$14.35
약 21,152원
구매대행 예상 비용은 로그인 후 확인하실 수 있습니다.
상품 특징
Newly Upgraded Jumper Starter: The Jump starter cable is exclusively designed for seamless compatibility with Milwaukee batteries(Compatible with all Milwaukee batteries models). (Battery not included)
Instructions For Use: 1. Connect The Red Battery Clamp Of The Jumper Cable To The Positive Terminal (+) Of The Vehicle, And The Black Clamp To The Negative Terminal (-). 2. Insert The Battery Into The Adapter And Ensure It Is Securely Locked. 3. Attempt To Start The Car. 4. Disconnect The Connection Between The Car Battery And Your Tool Battery After Successfully Starting The Car.
Specifications: 8 AWG Battery Jumper Cables For Jump Starting A Dead Or Weak Battery. Ideal For Trucks, Suvs, Full-Size Cars, Mid-Size Cars And Small/Compact Cars
Simple operation: Insert a fully charged battery into the adapter. Connect the red clip to the positive terminal of the car battery and the black one to the negative terminal. Start the vehicle and disconnect the cable clamp within 30 seconds
Safety Precautions: Do not reverse the operation sequence of the take-off device. Please use this product with care. It must not be overloaded. Please check the power supply of the equipment before use. Please remove the product from the vehicle within 30 seconds after it starts; otherwise, it may cause a safety accident. Note: Regularly check if your power bank can support your car. Please remember that the take-off device cannot convert voltage/step-down voltage!
Instructions For Use: 1. Connect The Red Battery Clamp Of The Jumper Cable To The Positive Terminal (+) Of The Vehicle, And The Black Clamp To The Negative Terminal (-). 2. Insert The Battery Into The Adapter And Ensure It Is Securely Locked. 3. Attempt To Start The Car. 4. Disconnect The Connection Between The Car Battery And Your Tool Battery After Successfully Starting The Car.
Specifications: 8 AWG Battery Jumper Cables For Jump Starting A Dead Or Weak Battery. Ideal For Trucks, Suvs, Full-Size Cars, Mid-Size Cars And Small/Compact Cars
Simple operation: Insert a fully charged battery into the adapter. Connect the red clip to the positive terminal of the car battery and the black one to the negative terminal. Start the vehicle and disconnect the cable clamp within 30 seconds
Safety Precautions: Do not reverse the operation sequence of the take-off device. Please use this product with care. It must not be overloaded. Please check the power supply of the equipment before use. Please remove the product from the vehicle within 30 seconds after it starts; otherwise, it may cause a safety accident. Note: Regularly check if your power bank can support your car. Please remember that the take-off device cannot convert voltage/step-down voltage!