Replacement Power Supply for Blackmagic ATEM Talkback Studio 4K Converter
블랙매직 ATEM 토크백 스튜디오 4K 컨버터용 교체 전원 공급 장치
| 상품번호 | 125656013247 |
| 상태 | New |
| 거래유형 | 즉시구매 |
| 출고국 | 미국 (US) |
상품 설명
NEW NO RETAIL BOX NEVER BEEN USED: You will get it as shown in the photos
Blackmagic Design ATEM 1 M/E Production Studio Switcher 4K IS NOT INCLUDED
This listing is only for 1 Internal Power Supply, it does not included any other things which are mentioned here
- OEM Replacement Updated Internal power supply for ATEM 1 M/E
Production Studio Switcher 4K, ATEM 1 M/E Production Studio 4K, ATEM Talkback Converter 4K, ATEM Studio Converter
- A must have backup power supply for BMD SWATEMPSW1ME4K
- A perfect replacement for originally BMD Clicking power supply
- It does not click like the one it came originally with ATEM 1 M/E Production Studio Switcher 4K
- If you do not know what click we talking about see the blog link at the bottom
- Task difficulty: Simple to Mild, takes approximately 5 minutes
- We recommend you take to a professional technician to replace it for you, If you do it Please note you doing this at your Owen risk.
- You need remove 16 screws total to replace this power supply
- Task difficulty: Simple to Mild depending on your knowledge of electronics
- We recommend you take to a professional technician to replace it for you, If you do it Please note you doing this at your Owen risk.
- To replace the power supply follow these simple instructions and see the photos and illustrations provided on this listing.
- What is included: Internal Power Supply only
- Compatible Blackmagic Design Units
ATEM 1 M/E Production Studio 4K, ATEM Production Studio 4K, ATEM Talkback Converter 4K, ATEM Studio Converter
How to replace
Warring High voltage! Please note you do this at your Owen risk. Disconnect form AC power. Locate and Remove all the 12 screws from the top cover (please see photos) and take picture of the power supply and Pay attention to polarity before removal of power supply. Disconnect the 3 Molex connectors for the power supply and circuit board. Remove the 6-Pin to Molex 4-Pin Power Adapter Cable and re- terminate/ reconnect the Molex Power Cable according to the polarity (please see photos) . Replace the new power supply and put back the 4 hexagon screws. Then Put the cover back using the 12 screws which you removed from the top cover. You are done. Please see the provided illustration and photos to help you. If you are unfamiliar with what is communicated above we recommend you take to a professional technician to replace it for you. Please note you doing this at your Owen risk.
Blackmagic Design ATEM 1 M/E Production Studio Switcher 4K IS NOT INCLUDED