This premium Cabinet Marquee Illumination Kit consists of two 500mm LED strips with 30 x 5050 clear white LEDs per strip and self adhesive 3M backing. The LEDs are clear white to give the very best illumination.

The kit also inclludes a jumper cable and 1.5m connection cable. Unlike other kits sold that have flimsy wiring and connectors, our premium kit comes with special connectors to connect the LEDs and wiring for easy and solid insallation.

It Requires a 12V input, which can be taken from a JAMMA power supply,  PC power supply or separate power supply.

Contents:

2 x 500mm LED strips with 30 x clear white 5050 LED per strip

3 x East Fit Connectors for easy and solid installation

1 x 1.5m Power Cable

1 x 20cm Jumper Cable

Instructions to secure wires in to connectors

1) Strip the end of the red and black wires so a small section of actual wiring is exposed.

2) Swist the wire so it is one solid piece and place both the red and blue wire a few mm into the connector ensuring the actual wire is making contact with the metal part inside the connector.

3) Use a pair of pliers to gently press the connector shut on one side until it clicks closed, then do the same on the other side being careful not to damage the connector. This will make a very strong and solid bond between the wiring and connectors.