MEP-804A, MEP-804B, MEP-805A, MEP-806A Replacement A1 AC Voltage Regulator

MEP-804A, MEP-804B, MEP-805A, MEP-806A Replacement A1 AC Voltage Regulator

Features include:

• Can be used regardless if factory Voltage Regulator was made by Libby or Technology Research Corporation (TRC)

• Replacement for your defective or missing Voltage Regulator... or to have a spare on hand!

• Does not use the existing T1 transformer, R1 or R16 resistor (no need to remove or replace them)

• Input and output fuse protection. Fuse's are easily replaced if ever needed.

• Works with or without the "Fuse Mod" (Fuse Mod is not needed with this regulator)

• Includes new pre-wired front panel R1 voltage adjustment potentiometer

• New mounting hardware, wire labels Zip ties & detailed instructions included for installation

• 1 year warranty

Easy Installation:

• Remove and label 12 wires from existing Voltage Regulator

• Remove existing Voltage Regulator

• Install new Voltage Regulator & reconnect the 12 wires.

• Remove existing voltage adjustment potentiometer from front panel.

• Install new pre-wired voltage adjust potentiometer in front panel.

• Connect four clearly labeled wires to four points behind the control panel.

• Install supplied Zip Ties to secure wiring.

Limitations

• Does not support parallel generator operation

• 60 Hz operation only

I personally assemble each of the Voltage Regulators.  Once built each Voltage Regulator is adjusted and load tested in a MEP to assure a defect free unit.

· 1 year warranty

· Includes detailed installation instructions

Returns accepted within 30 days.

Click on "See Other Items" to see the variety of MEP Generator supplies and accessories available!