Curly Maple Strat neck blank USA made (can be used as a template)
미국산 Curly Maple Strat 넥 블랭크 (템플릿으로 사용 가능)
| 상품번호 | 194948964346 |
| 상태 | New |
| 거래유형 | 즉시구매 |
| 출고국 | 미국 (US) |
이베이 판매가
$60
약 88,440원
구매대행 예상 비용은 로그인 후 확인하실 수 있습니다.
상품 설명
ONE Piece Curly Maple Stratocaster neck blank made in the USA. Blank has been routed to the
outer contour with a truss rod channel cut. Can also be used as a template.
Pics show Std. headstock size, LARGE (Yngwie) headstock also available please specify when ordering.
The blank is FLAT on both front and back and will require carving by the end user.
- .75" Thick will require a fingerboard.
- 1.65 ( 1-5/8") Nut Width
- 2-3/16" wide heel
- Flat Sawn.
- TR Channel cut for 18" Hot Rod Low Profile 2 Way Rod(.25"w x .375"d)
!!! Check my other listings !!!
This is a bare wood item NO protective coating aka “finish”, paint lacquer oil shellac sanding sealer or otherwise, has been applied. All sanding involved necessary to prep the surface prior to applying the finish of your choice is the responsibility of the buyer. Front and back outer most surfaces, i.e. faces, will be sanded to 100 grit prior to shipping. All sides, cavities, pockets, etc., may require additional sanding. As wood naturally varies from piece to piece grain patterns and color can vary slightly from photos.
Returns:
3-Day returns on damaged items during shipping. Buyer pays shipping both ways.
*Telecaster and Tele are registered trademarks of Fender® Musical Instrument Corporation.
JBL Instruments is in no way affiliated with Fender® Musical Corporation or any other musical instrument manufacturer in any way.