Track bike, fixed gear racing full carbon fiber, complete set, barley used
트랙 자전거 픽시 레이싱 풀 카본 파이버 완차 세트 거의 새상품
| 상품번호 | 287433633897 |
| 상태 | Used |
| 거래유형 | 즉시구매 |
| 출고국 | 미국 (US) |
이베이 판매가
$7,501
약 11,056,474원
구매대행 예상 비용은 로그인 후 확인하실 수 있습니다.
상품 설명
This bike is a professional track racing bike, it is very stiff and very fast.
The size is a 61 cm (center of seat post to center of head tube), this is what you want in a track bike, an extra long top tube for the best fit, look it up. This geometry does fall within the UCI limits for track frames and bars.
The frame, fork, seat post, handlebar, front wheel and rear wheel where all painted professionally by Bask Bikes in Austin Texas using Tropical Glitz Violet Candy clear coat to show off all of the beautiful carbon fiber.
The chainrings and sprockets are larger size for less resistance, and the set here ranges from (97.50” - 133.07”).
All of the bolts were replaced with titanium bolts.
The cranks and parts of the frame have helicopter tape for protection, including the stem and top tube if the wheel flops.
Some of the pieces were polished to a high shine to match the cranks and give some contrast pop here and there.
Everything was picked for speed on the track and to quickly change gear ratios so you get more time to rest.
Frame / Fork / seat post - BXT full carbon fiber frame, fork and seat post, modeled off the Canyon Speedmax CFR Track
Headset - Cane Creek Hellbender Lite
Bars - Hansling Sprint, 140, integrated full carbon fiber, reach is 240mm (center of stem to end of inside of grips)
Bartape - Renfrew Pro hockey tape, very sticky and doesn’t smoosh and move when gripping and pulling hard with bare hands and chalk
Seat - Selle Italia SLR Superflow, 140mm, titanium rails
Wheels - Rear: eBay, full carbon tubular, same mold as Princeton CarbonWorks, very smooth bearings Front: eBay, full carbon tubular, same mold as the 5 spoke HED, very smooth bearings
Tires - Vittoria Corsa Pro tubular, 25mm
Glued - professionally glued by Mellow Johnnys in Austin on May 6th 2026 using Vittoria Mastik 1 glue
Valve Extender - Continental, teflon tape was used on the threads, (comes with a spare)
Sprockets - Velobike sprokets, 18T, 17T, 16T, 15T, 14T, 13T
Lockrings - Dura Ace (2x)
Hub Nuts - Runwell Elite Silver Front (6x) Rear (6x), Runwell Elite Gold Front (2x) Rear (2x)
Wheelbags - Princeton CarbonWorks, padded, large, (3x), extra one for a front disc if you get one
Cranks - Dura Ace 7710, 165mm
Bottom Bracket - Dura Ace 7700, free ball and cone, this is so smooth and easy to rebuild and dial in perfectly
Chainrings - Velobike Elite 69T, 68T, 67T, 66T, 65T
Chainring Bolts - Dura Ace, one side is press fit into the cranks to make removing bolts easy
Chain - Izumi V Super Toughness, full length used for the 69 x 18 ratio
Pedals - Dura Ace PDR 9100
Pedal Strap System - Velobike Track Straps (3x) and Track Strap Mounts, the mounts stay on the pedals and make putting the straps on and off easy with the titanium bolts
Tools
Runwell Track Gear Bag - holds all of the chainrings, sprockets, tools, and extras you need for the velodrome
Titanium Runwell hub nut wrench
Runwell bottom bracket wrench
Park bottom bracket wrench
Hex wrench, the t-wrench is fast for chainring bol
State Bike Co chainwhip
State Bike Co locking wrench
Runwell chain bolt and nut tool
Hex wrench for pedal strap quick mount and horizontal dropout bolts (if needed, fingers work just fine)
Extras
Izumi V Supertoughness half link (2x)
Izumi V Supertoughness nut and bolt (2x)
Bartape
Chalk - great for amazing grip on the hockey tape
Chainring and tool bag - Runwell large size for the 69T
Pad - to protect the bars if you decide to work on your bike upside down, and to protect the chainrings in the bag
Dropout long bolts and nuts 5 extra
Dropout plate bolts, 8 extra
Runwell Chainline tool
Gold foil sticker cricut vinyl so you can customize logos, names, designs etc.
Helicopter tape templates for cranks (left and right), crank tips, chainstay, head tube (for custom logo), down tube (for custom logo), these are just the templates, helicopter tape is not included.
Velobike pump tool for disc wheel - 90 degree angle to pump up the rear tire on the disc wheel
Gear inch chart with the available ratios highlighted
The size is a 61 cm (center of seat post to center of head tube), this is what you want in a track bike, an extra long top tube for the best fit, look it up. This geometry does fall within the UCI limits for track frames and bars.
The frame, fork, seat post, handlebar, front wheel and rear wheel where all painted professionally by Bask Bikes in Austin Texas using Tropical Glitz Violet Candy clear coat to show off all of the beautiful carbon fiber.
The chainrings and sprockets are larger size for less resistance, and the set here ranges from (97.50” - 133.07”).
All of the bolts were replaced with titanium bolts.
The cranks and parts of the frame have helicopter tape for protection, including the stem and top tube if the wheel flops.
Some of the pieces were polished to a high shine to match the cranks and give some contrast pop here and there.
Everything was picked for speed on the track and to quickly change gear ratios so you get more time to rest.
Free Shipping - I will ship the bike using Bike Flights for free.
Headset - Cane Creek Hellbender Lite
Bars - Hansling Sprint, 140, integrated full carbon fiber, reach is 240mm (center of stem to end of inside of grips)
Bartape - Renfrew Pro hockey tape, very sticky and doesn’t smoosh and move when gripping and pulling hard with bare hands and chalk
Seat - Selle Italia SLR Superflow, 140mm, titanium rails
Wheels - Rear: eBay, full carbon tubular, same mold as Princeton CarbonWorks, very smooth bearings Front: eBay, full carbon tubular, same mold as the 5 spoke HED, very smooth bearings
Tires - Vittoria Corsa Pro tubular, 25mm
Glued - professionally glued by Mellow Johnnys in Austin on May 6th 2026 using Vittoria Mastik 1 glue
Valve Extender - Continental, teflon tape was used on the threads, (comes with a spare)
Sprockets - Velobike sprokets, 18T, 17T, 16T, 15T, 14T, 13T
Lockrings - Dura Ace (2x)
Hub Nuts - Runwell Elite Silver Front (6x) Rear (6x), Runwell Elite Gold Front (2x) Rear (2x)
Wheelbags - Princeton CarbonWorks, padded, large, (3x), extra one for a front disc if you get one
Cranks - Dura Ace 7710, 165mm
Bottom Bracket - Dura Ace 7700, free ball and cone, this is so smooth and easy to rebuild and dial in perfectly
Chainrings - Velobike Elite 69T, 68T, 67T, 66T, 65T
Chainring Bolts - Dura Ace, one side is press fit into the cranks to make removing bolts easy
Chain - Izumi V Super Toughness, full length used for the 69 x 18 ratio
Pedals - Dura Ace PDR 9100
Pedal Strap System - Velobike Track Straps (3x) and Track Strap Mounts, the mounts stay on the pedals and make putting the straps on and off easy with the titanium bolts
Tools
Runwell Track Gear Bag - holds all of the chainrings, sprockets, tools, and extras you need for the velodrome
Titanium Runwell hub nut wrench
Runwell bottom bracket wrench
Park bottom bracket wrench
Hex wrench, the t-wrench is fast for chainring bol
State Bike Co chainwhip
State Bike Co locking wrench
Runwell chain bolt and nut tool
Hex wrench for pedal strap quick mount and horizontal dropout bolts (if needed, fingers work just fine)
Extras
Izumi V Supertoughness half link (2x)
Izumi V Supertoughness nut and bolt (2x)
Bartape
Chalk - great for amazing grip on the hockey tape
Chainring and tool bag - Runwell large size for the 69T
Pad - to protect the bars if you decide to work on your bike upside down, and to protect the chainrings in the bag
Dropout long bolts and nuts 5 extra
Dropout plate bolts, 8 extra
Runwell Chainline tool
Gold foil sticker cricut vinyl so you can customize logos, names, designs etc.
Helicopter tape templates for cranks (left and right), crank tips, chainstay, head tube (for custom logo), down tube (for custom logo), these are just the templates, helicopter tape is not included.
Velobike pump tool for disc wheel - 90 degree angle to pump up the rear tire on the disc wheel
Gear inch chart with the available ratios highlighted