1200Lumen Laser Light Combo

FEATURES

• LED: CREE XPL2 10W powered by rechargeable battery

• Steady output and strobe of 1200 lumen, press the switch up to 3s to strobe

• Operation Voltage: 2-4.2V

• Robust anodized aircraft grade aluminum

• IPX6 water-resistance, impact resistant and shock-resistance

• When the battery power is less than 5%, it will automatically shut down (turn off the light and laser) to prevent battery damage. After automatic shutdown, such as press the power on button again to turn on the battery, indicator (red light) will be 0.2s / each time, flashing for 6 seconds to indicate a lack of power. Prohibit the power on.

• When charging, the battery power indicator will be red, and when fully charged, the red indicator light will become green.

---

SPECIFICATION

Model NO — XK76

Laser types —  Green 

Wavelength — 650nm / 520nm / 450nm

Laser power — <5mW

Laser Run Time — 52 hours±20% / 50 hours±20% / 50 hours±20%

Laser Light Run Time — 2.2 hours±20%

Light Run Time — 2.5 hours±20%

Led Light — CREE LED , 1200 lumens Max.

Material — Aluminum alloy

Battery Type — 18500 (2000MA) lithium polymer battery(Rechargeable)

Light Distance — 200 meter/656 ft at night

Charging Time — 2.5 hours

Standby Time — 1 year

Static Power Consumption — <20uA

Weight — 9.24oz

Operating temperature — -20~+50℃

---

RECHARGEABLE BATTERY

Meet two charging methods, you can switch at will according to your preference:

1. After the lack of power, directly charge the battery with the Type-C charging cable in the package, the battery must be installed inside the product, because it is to charge the battery; during the charging process, the charging indicator is red, and when it is charged, it becomes green.

2. Or buy an 18500 (2000MA) charger, the battery is charged directly on the charger.

---

WAY TO INSTALL

• This light can be mounted on standard Picatinny and Weaver rail with Screw Slot.

• Choose one of the holes for the screw to get forward/backward location.

• Loosen the mounting screw and push it, the rail will be extended, fix the screw into rail's groove.

• Tighten the screw to finish the installation.

Uninstallable Conditions:

1. No Rail

2. No Picatinny

3. No Slot

4. Clear Space less than 4.5 inch /115MM

---

LIGHT & LASER MODES

• Steady Flashlight: Press once the light button.

• Strobe Flashlight: Press and hold the light button for 3s to Switch.

• Steady Laser: Press once the Laser button.

• Strobe Laser: Press and hold the Laser button for 3s to Switch.

---

PACKAGE CONTENTS

1 * 1200 Lumen Laser Light

1 * Black Plastic Storage Box

1 * Type-C Cable

1 * Mounting Screw

1 * Mounting Screw

1 * Mounting Picatinny Rail

1 * Installed Wrench

1 * Mounting Wrench

1 * Zeroing Wrench

1 * 18500 (2000MA) Battery

---

ATTENTION

If your equipment does not have Picatinny Rail, package (6) and (7) (8) will help you solve this problem, just install (6) Picatinny Rail on top of your equipment and tighten it with (7) (8) screws.