M203 Mounting Kit / Bracket ORIGINAL LENGTH LMT M203 (READ DESCRIPTION)

This is a Remanufactured kit copied directly from the original Milspec M203 Rifle bracket designed to be mounted with an LMT M203 on a Government Profile 20 inch pencil barrel or M4 Government profile barrel.

Barrel diameter should be roughly .64” about 1.5” behind the gas block for easy install. (.64+/-.005” is standard government profile)

If mounting on a heavy barrel, modifications to the bracket and bushing will be required as heavy barrelsare larger in diameter than the pencil barrel that these are designed for. It’s doable, you’ll just need some pliers and a Dremel. Please message me if you are concerned about this.

These are laser cut 4130 steel blanks, bent and pressed to make the bracket. They have been Manganese Phosphate coated to match the original milspec bracket.

The Bushing are a medium weight Fiberglass Silicone resin composite.  Designed to operate in extreme temperatures. Tested them in the kiln at 650 degrees Fahrenheit. Lastly, the mounting screws are drilled for safety wire which is included.

There are 2 Lengths of tangs as y'all can see in the photos. This is the original length version for LMT Launchers. If you are mounting an Airsoft Launcher, those brackets can be found in the link below or the other listing on my profile.

Longer Version for Airsoft Launchers

https://www.ebay.com/itm/376484170660

All together, a complete kit that I feel is as close to the original as you can get without the help of the military industrial complex. These are all made by me, by hand, and with the help of the folks that helped me test them, they are now ready for yall.

If you would like different parts or mix and match quantities, just send me a message and we will put something together.

If y'all have any questions, please ask. And for some reason if y'all receive your kit and you aren't satisfied or something is off, I'll help you to make sure it works!

Thanks y'all