FAQ

배대지주소

사이즈조견표
주문/배송조회
입금액충전
입출금내역조회
마일리지조회
입금액환불요청
사업자정보등록
1:1문답
자주하는질문과답 FAQ
국제운송료 요율표
해외물류센터주소
사이즈조견표
취소/반품/교환/환불
파손/분실보상
통관/관세
에스크로서비스
개인정보취급방침
이용약관
회사소개
공지사항
찾아오시는길
아마존배송대행신청방법
사진확대

BEYIMEI PCIE SATA Card 8 Port, 6Gbps SATA 3.0 PCIe Card, PCIe to SATA Controller Expansion Card, upport 8 SATA 3.0 Devices, Suitable for All PCIE Slots (Marvell 88SE9215 + 575)
ASIN번호 B08DFMTP44
상품상태 New   
브랜드 Brand: BEYIMEI
판매자 미정
판매자위치 미확인
Color
현지 판매 가격
$46.81
상품가격 상세보기
관련상품



상품특징
Make sure this fits by entering your model number.8 SATA3.0 interfaces--- This PCIE SATA card allows you to add 8 SATA 3.0 6Gbps devices to your computer. You could make the system to boot from this SATA card but non RAID, (The RAID in INTEL is only for native SATA and can be grouped. It is an expansion card that cannot support third-party chips).Product chip --- Using the Marvell 88SE9215 + 575 chip enhances heat dissipation, long-lasting high temperature resistance and more stable operation.Support system --- WINXP/ WIN7/ WIN8 /WIN10/ LINUX。Support interface: There is an available PCI Express X1 slot, while supporting PCI-E X2 /X4/ X8/ X16 (This SATA 3.0 expansion card is only suitable for motherboard slots via PCI-E . Do not apply to PCI slots).This PCIe 1X8SATA expansion card contains Included 8x SATA cables and 1x 15pin SATA power splitter cable, make connection easier.(Synology can only recognize 4 disks)
상품설명
Color:8SATA Product Name: 8-Port SATA3.0 Expansion Card Product Root: Marvell 9215 JMB575 Product Interface: PCI-E 1X Support System: WIN8.x / WIN10 / Windows Server 2008R2 / 2012/2016/2019 / Linux 2.6 .x to 4.x Conforms to Serial ATA 3.0 specification, backwards compatible with SATA2.0 SATA1.0 Follow PCI-Express v2.0 specification and backwards compatible with PCI-Express v1. 0. Supports communication speeds of 6.0 Gbit / s, 3.0 Gbit / s and 1.5 Gbit / s Supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x and Gen 3i. Supports the AHCI1 .0 mode and IDE mode Native command queue (NCQ) support Support FIS based on port multiplier switch or command switch. Support hot hot swap. Compatible with SATA6G , 3G and 1.5G hard drives System requirements: A PCI Express 1x slot is available that supports 1x / 4x / 8x / 16x Information on the speed description < b r> 1. The best effect can be achieved with the SATA3.0 data cable. 2. The setting of the motherboard BOIS: SATA mode should be changed to AHCI. Although some motherboards are PCIE version 2.0, by default BOIS does not enable gen2 high speed mode, which must be enabled manually. The fastest speed of PCI-E 2.0 is 380-450 m / s. When connected to PCI-E1.0, the speed is only 200-300 m / s. Different computer configurations and SATA SSDs have different speeds. 3. SATA ports slow down when used at the same time. This is not for users looking for speed. They are only used for expansion hard disk interfaces. Packing list 1 x PCIe X1 to 8 SATA 3.0 card 8 x SATA cables 1 x SATA splitter adapter cable (1 to 4 SATA connector) 1 x low-profile bracket 1 x manual 1x 15pin SATA power splitter cable
































상품특징
Make sure this fits by entering your model number.8 SATA3.0 interfaces--- This PCIE SATA card allows you to add 8 SATA 3.0 6Gbps devices to your computer. You could make the system to boot from this SATA card but non RAID, (The RAID in INTEL is only for native SATA and can be grouped. It is an expansion card that cannot support third-party chips).Product chip --- Using the Marvell 88SE9215 + 575 chip enhances heat dissipation, long-lasting high temperature resistance and more stable operation.Support system --- WINXP/ WIN7/ WIN8 /WIN10/ LINUX。Support interface: There is an available PCI Express X1 slot, while supporting PCI-E X2 /X4/ X8/ X16 (This SATA 3.0 expansion card is only suitable for motherboard slots via PCI-E . Do not apply to PCI slots).This PCIe 1X8SATA expansion card contains Included 8x SATA cables and 1x 15pin SATA power splitter cable, make connection easier.(Synology can only recognize 4 disks)
상품설명
Color:8SATA Product Name: 8-Port SATA3.0 Expansion Card Product Root: Marvell 9215 JMB575 Product Interface: PCI-E 1X Support System: WIN8.x / WIN10 / Windows Server 2008R2 / 2012/2016/2019 / Linux 2.6 .x to 4.x Conforms to Serial ATA 3.0 specification, backwards compatible with SATA2.0 SATA1.0 Follow PCI-Express v2.0 specification and backwards compatible with PCI-Express v1. 0. Supports communication speeds of 6.0 Gbit / s, 3.0 Gbit / s and 1.5 Gbit / s Supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x and Gen 3i. Supports the AHCI1 .0 mode and IDE mode Native command queue (NCQ) support Support FIS based on port multiplier switch or command switch. Support hot hot swap. Compatible with SATA6G , 3G and 1.5G hard drives System requirements: A PCI Express 1x slot is available that supports 1x / 4x / 8x / 16x Information on the speed description < b r> 1. The best effect can be achieved with the SATA3.0 data cable. 2. The setting of the motherboard BOIS: SATA mode should be changed to AHCI. Although some motherboards are PCIE version 2.0, by default BOIS does not enable gen2 high speed mode, which must be enabled manually. The fastest speed of PCI-E 2.0 is 380-450 m / s. When connected to PCI-E1.0, the speed is only 200-300 m / s. Different computer configurations and SATA SSDs have different speeds. 3. SATA ports slow down when used at the same time. This is not for users looking for speed. They are only used for expansion hard disk interfaces. Packing list 1 x PCIe X1 to 8 SATA 3.0 card 8 x SATA cables 1 x SATA splitter adapter cable (1 to 4 SATA connector) 1 x low-profile bracket 1 x manual 1x 15pin SATA power splitter cable




























2020-09-16 21:06:06