FAQ

배대지주소

사이즈조견표
주문/배송조회
입금액충전
입출금내역조회
마일리지조회
입금액환불요청
사업자정보등록
1:1문답
자주하는질문과답 FAQ
국제운송료 요율표
해외물류센터주소
사이즈조견표
취소/반품/교환/환불
파손/분실보상
통관/관세
에스크로서비스
개인정보취급방침
이용약관
회사소개
공지사항
찾아오시는길
아마존배송대행신청방법
사진확대

4 Pieces Long Shaft Clock Movements Clock Hands Mechanism High Torque Mechanism with 5 Different Pairs of DIY Clock Repair Parts Replacement for Clock Repair Replacement
ASIN번호 B08L4SLWZW
상품상태 New   
상품구분 Tools & Home Improvement / Hardware
브랜드 Visit the Mudder Store
판매자 Cezew life
판매자위치 미확인
현지 판매 가격
$13.99
상품가격 상세보기
관련상품



상품특징
Make sure this fits by entering your model number.DIY clock repair kit: you will get 4 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit well to different styles of clock frame, which are great for repairing, replacing or making a clock by yourselfSize details: the total shaft length is approx. 20 mm/ 0.8 inches, and the thread length is approx. 14.6 mm/ 0.57 inches; Jump second movement is suitable for 9 - 13 mm/ 0.35 - 0.51 inches thickness of clock panelAccurate time keeping and quiet motor: the long shaft clock mechanism offers great accuracy and dependability, they are equipped with sweeping motion, no ticking and will provide you with a quiet environmentWide application: these clock repair replacement parts are fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable to be applied as DIY quartz wall clock replacement movement parts5 Different styles of hands: this clock mechanism replacement set comes with 5 pairs of clock hands in different styles and length for your options, making them great for clock creations and repairs while providing a decorative effect
상품설명
Great replacement parts: If you don't want to throw away the broken clock that has accompanied you for a long time, this clock replacement kit is helpful to repair the clock at home, helping you to remain the memories that this antique clock gave you. Specifications: Material: plastic, brass, aluminum Colors: black, gold Shaft diameter: 3/8 inch Threaded shaft length: 7/16 inch Overall shaft length: 3/4 inch Style 1: hour/ minute/ second hand length (from the center of the hole to the end): approx. 2.68 inch/ 3.62 inch/ 4.92 inch Style 2: hour/ minute/ second hand length (from the center of the hole to the end): approx. 2.83 inch/ 3.86 inch/ 4.92 inch Style 3: hour/ minute/ second hand length (from the center of the hole to the end): approx. 2.75 inch/ 3.94 inch/ 4.92 inch Style 4: hour/ minute/ second hand length (from the center of the hole to the end): approx. 2.87 inch/ 4.33 inch/ 6.10 inch Style 5: hour/ minute/ hand length (from the center of the hole to the end): approx. 3.23 inch/ 4.61 inch Second cap nut: approx. 1/ 4 inch Case size: approx. 2 1/4 x 2 1/4 x 5/8 inch (L x W x H) Second hand motion: sweeping Battery: 1 x 1.5 V AA carbon battery (not included) Package includes: 4 x Quartz clock movements 5 x Minute hands 5 x Hour hands 4 x Second hands 2 x Second cap nuts 2 x Rubber gaskets 2 x Brass washers 2 x Brass hex nuts 2 x Metal hooks Notes: The hour and minute hands have a protective plastic coating that needs to be carefully removed. Be careful not to bend the hands with too much pressure. Please do not use alkaline battery, rechargeable battery, or they will damage the movement. Do not tighten the brass hex nut too tight. Press hard to get all clock hands in place. Check if all hands are aligned. Please allow slight dimension error due to manual measurement.




































상품특징
Make sure this fits by entering your model number.DIY clock repair kit: you will get 4 pieces of high torque long shaft clock movements with 5 different pairs of hands, these replacement parts suit well to different styles of clock frame, which are great for repairing, replacing or making a clock by yourselfSize details: the total shaft length is approx. 20 mm/ 0.8 inches, and the thread length is approx. 14.6 mm/ 0.57 inches; Jump second movement is suitable for 9 - 13 mm/ 0.35 - 0.51 inches thickness of clock panelAccurate time keeping and quiet motor: the long shaft clock mechanism offers great accuracy and dependability, they are equipped with sweeping motion, no ticking and will provide you with a quiet environmentWide application: these clock repair replacement parts are fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable to be applied as DIY quartz wall clock replacement movement parts5 Different styles of hands: this clock mechanism replacement set comes with 5 pairs of clock hands in different styles and length for your options, making them great for clock creations and repairs while providing a decorative effect
상품설명
Great replacement parts: If you don't want to throw away the broken clock that has accompanied you for a long time, this clock replacement kit is helpful to repair the clock at home, helping you to remain the memories that this antique clock gave you. Specifications: Material: plastic, brass, aluminum Colors: black, gold Shaft diameter: 3/8 inch Threaded shaft length: 7/16 inch Overall shaft length: 3/4 inch Style 1: hour/ minute/ second hand length (from the center of the hole to the end): approx. 2.68 inch/ 3.62 inch/ 4.92 inch Style 2: hour/ minute/ second hand length (from the center of the hole to the end): approx. 2.83 inch/ 3.86 inch/ 4.92 inch Style 3: hour/ minute/ second hand length (from the center of the hole to the end): approx. 2.75 inch/ 3.94 inch/ 4.92 inch Style 4: hour/ minute/ second hand length (from the center of the hole to the end): approx. 2.87 inch/ 4.33 inch/ 6.10 inch Style 5: hour/ minute/ hand length (from the center of the hole to the end): approx. 3.23 inch/ 4.61 inch Second cap nut: approx. 1/ 4 inch Case size: approx. 2 1/4 x 2 1/4 x 5/8 inch (L x W x H) Second hand motion: sweeping Battery: 1 x 1.5 V AA carbon battery (not included) Package includes: 4 x Quartz clock movements 5 x Minute hands 5 x Hour hands 4 x Second hands 2 x Second cap nuts 2 x Rubber gaskets 2 x Brass washers 2 x Brass hex nuts 2 x Metal hooks Notes: The hour and minute hands have a protective plastic coating that needs to be carefully removed. Be careful not to bend the hands with too much pressure. Please do not use alkaline battery, rechargeable battery, or they will damage the movement. Do not tighten the brass hex nut too tight. Press hard to get all clock hands in place. Check if all hands are aligned. Please allow slight dimension error due to manual measurement.
































2021-01-12 22:57:00